Dream 2.0 Slope Soarer - Carbon 2m

The Dream 2.0 is a hot new 2m slope soarer. This model is nicely finished with great graphics. We are just stocking the all carbon version, and this is a very strong very heavy layup which should hold up well to the rough and tumble of slope flying

The glider fuselage has the nosecone in place (as shown in the photos) and a good sized canopy hatch. The fin incorporates a nicely engineered bell crank to actuate the all-flying tail, and an access hatch for connecting the linkage.

The two part wing is nicely finished and of hollow molded construction. The through-fuselage wing joiner is very substantial and imparts just one degree of dihedral per panel, ensuring good aerobatic performance and an attractive look in the air. The wing has generous sized access hatches for the flap and aileron servos which can be up to 10 mm thick.

Dream 2 Slope Soarer Specifications
Wing span	2.0 m	79 in
Wing area	32.2 dm2	499 sq in
Length	119 cm	46.8 in
Flying weight from	1443 g	50.9 oz
Wing loading	44.8 g/dm	14.7 oz/sq ft
Aspect ratio	12.4
Wing airfoil	Proprietary
EDA (dihedral)	1.0º
Centre of Gravity	65-80 mm from wing leading edge
Controls	Rudder, elevator, ailerons, flap

Dream 2 Slope Soarer Typical Weights
Fuselage	280 g	9.9 oz
Wings	674 g	23.8 oz
Tail Plane	53 g	1.9 oz
Wing joiner	77 g	2.7 oz
Accessories	35 g	1.2 oz
Total structure	1119 g	39.5 oz
Wiring	24 g	0.8 oz
Pushrods	12 g	0.4 oz
Receiver	8 g	0.3 oz
Rudder servo	20 g	0.7 oz
Elevator servo	20 g	0.7 oz
Wing servos (4)	50 g	1.8 oz
Battery	140 g	4.9 oz
Nose weight	50 g	1.8 oz
Flying weight	1443 g	50.9 oz

Recommended Servos
Rudder & Elevator	KST X10-710, KST DS145, KST X12-508, KST MS320, MKS HV6130H
Flap	KST X10, KST DS125, MKS HBL6625, MKS HV6130
Aileron	KST X10 Mini, KST X10, KST DS135, KST DS125, MKS HBL6625 Mini, MKS HV6130

Recommended Control Throws
Rudder	20 mm each way
Elevator	12 mm up / 12 mm down
Ailerons	14 mm up / 10 mm down
Flap	45 mm down
Crow brake mix	10 mm up aileron with full down flap

Chinese video of Dream 2.0