|KST X08-H V5 Specifications|
|Body dimensions||23.5 mm wide x 8.0 mm thick x 16.8 mm high||0.93" wide x 0.31" thick x 0.66" high|
|Max dimensions||23.5 mm wide x 8.0 mm thick x 25.0 mm high||0.93" wide x 0.31" thick x 0.98" high|
|Stall torque (3.8V)||1.40 kg.cm||19 oz.in|
|Stall torque (6V)||2.20 kg.cm||31 oz.in|
|Stall torque (8.4V)||2.80 kg.cm||39 oz.in|
|Weight||8.3 g||0.29 oz|
|Lead length||10 cm||4.0 in|
|Operating speed (3.8V)||0.18 sec/60°|
|Operating speed (6V)||0.15 sec/60°|
|Operating speed (8.4V)||0.09 sec/60°|
|Operating voltage||3.8V to 8.4V|
|Bearings||2 ball bearings|
|Gear material||Aluminium alloy / copper-bronze alloy|
|Case material||Aluminium alloy|
|Motor type||Coreless DC motor|
|Working frequency||333 Hz|
|Supplied accessories||3 plastic output arms, 1 arm retaining screw, 4 mounting screws|
|Optional accessories||KST X08 Servo Arm Set, Plastic Frame only for the KST X08H, Ply Frame for KST X08, Pulley For KST X08|
Review by: Fred Weaver
I like these servos because "They Work".... I recently switched over to HV type servos and these seem to have the power and centering we need.
I like the service I get from Neil and his packaging and shipping is very good.
Review by: MikeKST Servos for a Mini Q
I used these expensive servos in my Mini Q as I did not wish to "Spoil the ship for a halfpenny worth of tar" so to speak, they have proved to be ideal for the Mini Q racer. The service from Hyperflight is excellent.
Review by: Stephen WilkieNo Brainer
I have KST 08's in all my F5B models, I think they are an excellent product/weight/performace package. As to where to get them, Hyperflight equally a no brainer.
Review by: JimKST X08H
Have these in all my DLG’s since the last 3 years. (Snipe, NXT, Vortex 3, CX5) They all work flawlessly.
Review by: Alain LeclercqQualité correcte
Tarifs un peu execif.
Review by: Massimo BianchiKST X08H V3/V5 HV Horizontal Lug Servo