|KST X08-H V5 Specifications|
|Body dimensions||23.5 mm wide x 8.0 mm thick x 16.8 mm high||0.93" wide x 0.31" thick x 0.66" high|
|Max dimensions||23.5 mm wide x 8.0 mm thick x 25.0 mm high||0.93" wide x 0.31" thick x 0.98" high|
|Stall torque (3.8V)||1.40 kg.cm||19 oz.in|
|Stall torque (6V)||2.20 kg.cm||31 oz.in|
|Stall torque (8.4V)||2.80 kg.cm||39 oz.in|
|Weight||8.3 g||0.29 oz|
|Lead length||10 cm||4.0 in|
|Operating speed (3.8V)||0.18 sec/60°|
|Operating speed (6V)||0.15 sec/60°|
|Operating speed (8.4V)||0.09 sec/60°|
|Operating voltage||3.8V to 8.4V|
|Bearings||2 ball bearings|
|Gear material||Aluminium alloy / copper-bronze alloy|
|Case material||Aluminium alloy|
|Motor type||Coreless DC motor|
|Working frequency||333 Hz|
|Supplied accessories||3 plastic output arms, 1 arm retaining screw, 4 mounting screws|
|Optional accessories||KST X08 Servo Arm Set, Plastic Frame only for the KST X08H, Ply Frame for KST X08, Pulley For KST X08, Frame with plain bearing for the KST X08, VM Spring Loaded Pulley Set for X08|
Review by: Carl TKST X08H
These are terrific servos, very small and light, but also surprisingly powerful in the high voltage version. I have been using them for all surfaces in a Snipe, and for ailerons in my Ultima 2 Standard. They reduce the outboard weight on the U2 and are able to handle the loads imposed by this airframe without blowback. I bring the ailerons down with flaps, but not as much throw, for descent preset and also for landing. I am pleased with these servos and with Neil's prompt service and shipping.
Review by: Anonymous
Exellent service, speedy and precise as allways. Top notch servos!
Review by: Paul CKST Quality
The usual great KST Quality and fantastic service from Neil and his team.
Review by: AndynrKST Xo8H
these are great servos - the first time have bought them. Installed in V tail of scale glider. Excellent centering - will buy again. Great service from Neil - ordered and arrived the following day. Also bought the servo mounts - these are great too. will buy again
Review by: Fred Weaver
I like these servos because "They Work".... I recently switched over to HV type servos and these seem to have the power and centering we need.
I like the service I get from Neil and his packaging and shipping is very good.
Review by: MikeKST Servos for a Mini Q
I used these expensive servos in my Mini Q as I did not wish to "Spoil the ship for a halfpenny worth of tar" so to speak, they have proved to be ideal for the Mini Q racer. The service from Hyperflight is excellent.
Review by: Stephen WilkieNo Brainer
I have KST 08's in all my F5B models, I think they are an excellent product/weight/performace package. As to where to get them, Hyperflight equally a no brainer.
Review by: JimKST X08H
Have these in all my DLG’s since the last 3 years. (Snipe, NXT, Vortex 3, CX5) They all work flawlessly.
Review by: Alain LeclercqQualité correcte
Tarifs un peu execif.
Review by: Massimo BianchiKST X08H V3/V5 HV Horizontal Lug Servo