TJI Screamer 2m

The TJI Screamer is a fun 2m slope soaring glider that flies with attitude! It has gained a great reputation, and HyperFlight are proud to now be stocking this hot-shot model. The Screamer is also known as the Tracer in some markets.The high-quality all-moulded structure is available in glass/carbon and full-carbon layups.

• Slender fuselage for maximum performance.
• 2-piece V-tail with control horn shrouds for minimum drag.
• Wing ballast capability, with a 10 x 20 x 155mm ballast pocket in each wing.
• Inverted nose servo mounting.
• Slip-on nose cone for easy access to the RC equipment.
• No external flap linkages, allowing the option of fitting LDS drives.

Screamer Slope Soarer Specifications
Wing span	2.0 m	79 in
Wing area	28.3 dm2	438 sq in
Length	119 cm	46.8 in
Flying weight from	1365 g	48.1 oz
Wing loading	48.3 g/dm	15.8 oz/sq ft
Aspect ratio	14.2
Wing airfoil	Proprietary
EDA (dihedral)	1.5º
Centre of Gravity	94-96 mm from wing leading edge
Controls	V tail, ailerons, flaps

Recommended RC
V tail	KST DS145, KST X10-710, KST, KST MS320, MKS HV6100, MKS DS6100,
Flap	KST DS135, KST X10 Mini, MKS HV6130, CHA HV85H
Aileron	KST DS135, KST X10 Mini, MKS HV6130, CHA HV85H
Receiver	6 channel rx to match your transmitter
Power	2S 18650 LiFe

Recommended Control Throws (for 95 mm CG)
V tail pitch	8 mm up / 5 mm down at root
V tail yaw	5 mm left / 5 mm right at root
Ailerons	5 mm up / 2 mm down at tip
Flap (brake)	75 deg or as much down as possible
Crow	Flap 30 mm down at root, ailerons 3 mm up at tip, elevator 3mm down
Snap flap	up to 4 mm down flap with up elevator. Ailerons move with flaps

Screamer Slope Soarer Glass Layup Typical Weights
Total structure	1045 g	36.9 oz
Wiring	20 g	0.7 oz
Pushrods	15 g	0.5 oz
Receiver	8 g	0.3 oz
V tail servos (2)	20 g	0.7 oz
Wing servos (4)	92 g	3.2 oz
Battery	100 g	3.5 oz
Noseweight	65 g	2.3 oz
Flying weight	1365 g	48.1 oz