TJI Screamer Hotliner 2m
Description
The TJI e-Screamer is a fun 2m hotliner that flies with attitude! It has gained a great reputation, and HyperFlight are proud to now be stocking this hot-shot model. The Screamer is also known as the Tracer in some markets.The high-quality all-moulded structure is available in glass/carbon and full-carbon layups.
- Slender fuselage for maximum performance.
- 2-piece V-tail with control horn shrouds for minimum drag.
- Wing ballast capability, with a 10 x 20 x 155mm ballast pocket in each wing.
- Inverted nose servo mounting.
- Slip-on nose cone for easy access to the RC equipment.
- No external flap linkages, allowing the option of fitting LDS drives.
| Screamer Hotliner Specifications | ||
|---|---|---|
| Wing span | 2.0 m | 79 in |
| Wing area | 28.3 dm2 | 438 sq in |
| Length | 119 cm | 46.8 in |
| Flying weight from | 1420 g | 50.1 oz |
| Wing loading | 50.3 g/dm | 16.5 oz/sq ft |
| Aspect ratio | 14.2 | |
| Wing airfoil | Proprietary | |
| EDA (dihedral) | 1.5º | |
| Spinner Diameter | 36 mm | |
| Centre of Gravity | 94-96 mm from wing leading edge | |
| Controls | V tail, ailerons, flaps, throttle | |
| Recommended RC | |
|---|---|
| V tails | MKS HV6100, KST DS145, KST X10-710, KST, KST MS320 |
| Flaps | CHA HV85H, KST DS135, KST X10 Mini, MKS HV6130 |
| Ailerons | CHA HV85H, KST HS08A, KST DS135, KST X10 Mini, MKS HV6130 |
| Receiver | 7 channel rx to match your transmitter |
| Power | 3S 2Ah LiPo |
| Powertrain Recommendation | |
|---|---|
| Motor | Dualsky EG700-10 |
| Spinner | 36mm GM F5J Spinner, 5mm Split Collet for GM Spinners |
| 3S LiPo prop | GM 10x6 |
| ESC | Dualsky SUMMIT 60 SLIM 6V SBEC |
| Battery | 1500mAh - 2000mAh 3S 80C LiPo |
| Recommended Control Throws (for 95 mm CG) | |
|---|---|
| V tail pitch | 8 mm up / 5 mm down at root |
| V tail yaw | 5 mm left / 5 mm right at root |
| Ailerons | 5 mm up / 2 mm down at tip |
| Flap (brake) | 75 deg or as much down as possible |
| Crow | Flap 30 mm down at root, ailerons 3 mm up at tip, elevator 3mm down |
| Snap flap | up to 4 mm down flap with up elevator. Ailerons move with flaps |
| Screamer Hotliner Typical Weights | ||
|---|---|---|
| Total structure | 1045 g | 36.9 oz |
| Wiring | 20 g | 0.7 oz |
| Pushrods | 15 g | 0.5 oz |
| Receiver | 8 g | 0.3 oz |
| V tail servos (2) | 20 g | 0.7 oz |
| Wing servos (4) | 56 g | 2.0 oz |
| Motor | 87 g | 3.1 oz |
| Speed control | 33 g | 1.2 oz |
| Battery | 114 g | 4.0 oz |
| Prop & Spinner | 22 g | 0.8 oz |
| Flying weight | 1420 g | 50.1 oz |
Reviews 0
Related Categories
Related Products
