KST HS08A Wing Servo Specifications | ||
---|---|---|
Body dimensions | 23.5 mm wide x 8.0 mm thick x 25.3 mm high | 0.93" wide x 0.31" thick x 1.00" high |
Max dimensions | 29.5 mm wide x 8.0 mm thick x 29.0 mm high | 1.16" wide x 0.31" thick x 1.14" high |
Stall torque (3.8V) | 2.8 Kg.cm | 39 oz.in |
Stall torque (6V) | 4.5 Kg.cm | 62 oz.in |
Stall torque (7.4V) | 5.2 Kg.cm | 72 oz.in |
Weight | 11 g | 0.39 oz |
Lead length | 15 cm | 5.9 in |
Operating speed (3.8V) | 0.21 sec/60° | |
Operating speed (6V) | 0.13 sec/60° | |
Operating speed (7.4V) | 0.11 sec/60° | |
Operating voltage | 3.8V to 8.4V | |
Operating temperature | -20 to +65 °C | |
Bearings | 2 ball bearings | |
Gear material | Hardened Steel | |
Case material | 7075 aluminium alloy | |
Motor type | Coreless DC motor | |
Working frequency | 333 Hz | |
Dead band/resolution | 1 µs | |
Pulse width for ± 60º | 1000 - 2000 µs | |
Digital | Yes | |
Programmable | No | |
Position feedback | Potentiometer | |
Supplied accessories | 3 output arms, 2 arm retaining screws, 4 mounting screws | |
Optional accessories | Pulley For KST X08, KST X08 Servo Arm Set, Frame with plain bearing for the KST X08, Integrated Drive System/Mono for KST X08, VM Spring Loaded Pulley Set for X08 |
Review by: Anonymous
Havent started mounting yet. Service is excellent, but paying by Paypal vas expensive.
Review by: Vladimir
KST HS08AFirst time used these servos , cantering is good . I am waiting for the weather for test
Review by: Nicolas
This KST servo has more backlash than the MKS 6100 servo, but it works well under all voltages. If you prefer no backlash, it's better to use the MKS.
Review by: Jim Hathaway
F5J Flap servoBravely fitted these as Flap servos in an El Nino. A 10mm servo would have been a very tight fit in the thin wing. Fits perfectly in the same frames as the rest of the X8 range. Landed several times today and threw the glider around in breezy conditions. Behaved perfectly on 7.5V.