Prices shown exclude VAT 


Product Code: YGE-35LVT
 (4 reviews)

Price: $94.09

More than 10 in stock


The YGE35 LVT ESC is the latest high quality German engineered brushless electronic speed controller for F5J powered gliders, helicopters and sports models. YGE is the most reliable brand of speed controller currently available and gives the best performance from all electric motors.

Apart from having telemetry facilities the YGE35 LVT ESC has a very powerful BEC whose output voltage is configurable between 5.5V and 8.4V. The BEC can supply 5A continuously and 10A for up to 10 seconds making it suitable for most models.

What's new:
  • "T" for Telemetry. Following protocols are currently compatible: Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
  • Firmare update capable using the USB-Adapter.
  • Entirely overhauled hardware and software (32-bit).
  • The PWM frequency is automatically optimised for the motor.
  • Current-limitation.
  • Super smooth motor startup using sinewave modulated currents.
  • Adjustable HV-BEC from 5.5 to 8.4V.
  • High BEC-current rating: 5A continuous / 10A peak.
  • Dimensions in mm: 34 x 23 x 8
  • Weight 25g with cables / 13g without.
  • Basic settings via mode-setup
  • BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software using the optional USB-adapter.
  • Cannot be programmed using the ProgCard 3

Use the TexY product to interface with Futaba, Spektrum and FrSky radios.

The YGE35 LVT ESC is a 35 A electronic speed control with a powerful 5.5V- 8.4V Switching BEC (battery eliminator circuit) for powering the RC. The BEC can give out 5 A continuously and 10 A for short periods. Adequate cooling is required for sustained running at the maximum continuous full power ESC and BEC current limits.

The YGE35 LVT has powerful braking facilities to ensure that folding props fold correctly, without over straining the gearbox.

The YGE35 LVT has an excellent helicopter governor mode allowing low and high rpm flight condition with the same pinion, allowing modern flybarless helis to benefit from the excellent low RPM capabilities of flybarless modules.

The YGE35 LVT has these benefits:
  • Under voltage protection by power reduction.
  • Configurable under voltage detection.
  • Suitable for LiPo, LiFe, NiMh, NiCd and new battery chemistries.
  • Switching BEC ensures reliable well regulated 5.5V- 8.4V power to the RC.
  • Excellent speed regulation (Governor mode).
  • Soft start.
  • Active free-wheel, allowing unlimited part load operation.
  • Automatic or 6 step adjustable timing.
  • Continuously adjustable F3A brake.
  • Three step adjustable regular back EMF brake.
  • Temperature and overload warning.
  • Anti sparking circuit reduces connection sparks and eliminates damage.

YGE35 LVT ESC Specifications
Continuous current 35 A
Max current (10s) 45 A
Voltage range 6V - 22V (2S-6S LiPo)
BEC type Switching (uBEC)
BEC output voltage 5.5V- 8.4V
BEC continuous current 5 A
BEC max current 10 A
Dimension 34 mm x 23 mm x 8 mm
Weight bare/inc cables 25 g / 13 g
Switching rate 8 to 16 kHz
Commutation limit 240, 000 RPM (2-Pole motors)
Programmed using Transmitter, YGE USB Adaptor

Reviews 4  

 Review by:


I had a few initial teething pains setting up the YGE PC software. Turned out my laptop did not have specific USB drivers that are required. This was not mentioned or specified in YGE docs. (Through RCG forum help) once driver was sourced & installed the YGE PC program was able to run. Most ESC input parameters are straightforward, others are a bit confusing with limited descriptions of parameters. This could use some improvement. Note that you cannot use the program card on this generation ESC.

Hardware wise & functionality ESC seems to be operating very good so far - compact, light, robust HV capable BEC, several ramp-up & brake options, motor timing etc. As of this writing I don't think you can reverse motor direction within software for some reason. Maybe some enhancements like this will evolve over time. I have nor played with telemetry yet, next on list. Overall satisfied with ESC.

 Review by:

I use many yge controllers, all reliable. Needed a lighter one for my light volo f5j and this model is suited for the job. I like the possibility to choose the voltage for the receiver. You need the programming unit for that.

 Review by:

I use many yge controllers, all reliable. Needed a lighter one for my light volo f5j and this model is suited for the job. I like the possibility to choose the voltage for the receiver. You need the programming unit for that.

 Review by:


Great product. Smooth start and operation. The thin design is perfect for the El Niņo. Only issue was setting timing - lower than I set for the Graupner 50-T it replaced. Wound up setting six degrees manually. The USB interface is very easy to use and made this an easy task. High-Voltage BEC is a must as I exclusively use HV servos.

Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   twitter   Google My Business

Contact Us

Drybank Farm
Fosse Way, Ettington
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
Contact Form