|KST X06 V6 Specifications|
|Body dimensions||20.0 mm wide x 7.0 mm thick x 16.6 mm high||0.79" wide x 0.28" thick x 0.65" high|
|Max dimensions||28.0 mm wide x 7.0 mm thick x 19.3 mm high||1.10" wide x 0.28" thick x 0.76" high|
|Stall torque (3.8V)||0.8 Kg.cm||11 oz.in|
|Stall torque (6V)||1.5 Kg.cm||21 oz.in|
|Stall torque (8.4V)||1.8 Kg.cm||25 oz.in|
|Weight||6.4 g||0.23 oz|
|Lead length||15 cm||5.9 in|
|Operating speed (3.8V)||0.12 sec/60°|
|Operating speed (6V)||0.08 sec/60°|
|Operating speed (8.4V)||0.07 sec/60°|
|Operating voltage||3.8V to 8.4V|
|Operating temperature||-20 to +65 °C|
|Bearings||1 ball bearing|
|Gear material||Hardened Steel|
|Case material||7075 aluminium alloy|
|Motor type||Coreless DC motor|
|Working frequency||333 Hz|
|Dead band/resolution||2 µs|
|Pulse width for ± 60º||1000 - 2000 µs|
|Supplied accessories||4 output arms, 2 arm retaining screws, 4 mounting screws|
|Optional accessories||Pulley For KST X08, KST X06 Arm Set, KST X06 X06N X06H Gear Set, Plastic Frame only for the KST X06, Ply Frame for KST X06|
Review by: DenesDisaster
Disaster, unusable, ...
Center unstable (varies depending on temperature and voltage)
Review by: Tony Whittakerkst 06 servo
Smooth and small, not cheap, but that's the point
Review by: Rex A.
The usual well packed and quick delivery for these tiny, jewell like servos. Bench tested only at this time but speed, power and quiet operation are as expected.
Review by: Anonymous
High quality service
Review by: Terry.Superb service
Ordered Friday arrived Saturday - need I say more!
Review by: BertGreat quality
Great high speed high torque servos in a very small size. No noise also when in neutral position under load. Very nice set of servos.
Review by: Anonymousvery tiny servos
Everything seems allright. Couldn‘t test it so far.
Review by: TrevorKST X06 Servo
Have used KST servos in the past with great results. These X06’s are super light and accurate. They suited my needs perfectly. Also prompt service from Hyperflight!
Review by: Nick.Great. Fantastic. Outstanding.
OK I am a fan of hyper flight, but if your not it's because you haven't used them yet. The X06 is a servo, it's just a servo. Wow no chatting with its friends precisely doing what it's designed to do. Powerful little fellow too. Recommended 😁.
Delivery UK to UK one day. Outstanding 👍.
Review by: Robby BLovely little servos
I bought a couple of these to replace the 2 Bluebird AMG's in my Elf because the constant buzz of the AMG's finally pushed me over the edge. The KST06's are totally silent and just about fit into the Elf with the lugs still on (with some trimming of the very central leading edge. Lugs left on because I'll rob the servos from the Elf later in the year). I'm quite happy to give up a couple of grams for the extra quality that the KST's offer over the Bluebirds
Review by: Ian Harveymicro elevator swervo
As usual, good advice from Neil and very happy with this recommendation.
Review by: Robert Rent
Small. light and accurate. Usual excellent Hyperflight sales and shipping.
Review by: AnonymousKst06
Three words. Precision, Speed, Micro.
Review by: Paul BKST X06 Servo - 1.8Kg.cm 0.07s 6.4g 7mm.
Great Service as always from Hyperflight. These servos certainly compliment the rest of the KST range with a look of quality and very quiet operation, they have been installed using the plastic frames which are available from Hyperflight, make sure you keep the four very small screws supplied with the servo as you need two to hold the servo in the frame(there are no screws supplied with the frame), Not flight tested yet but will work hard being installed in a D40 so time will tell.
Review by: Tommy
Usually never buying Mk.I anything but wanted to have slightly smaller servos for elevator and rudder on my newly acquired Progress dlg. First impressions are good, the Kst works very civilizedly and quietly. Much smaller than X08 which helped fitting them in. No flying yet.
Review by: Tony WhittakerKST NEW 06
Just got a pair. I wanted the "iphone11" of small servos, and I got that. Small, quality, quiet, smooth. Fine on 1S lipo. Just what I wanted, the Rolls Royce of DLG servos.