| KST X06 Specifications | ||
|---|---|---|
| Body dimensions | 20.0 mm wide x 7.0 mm thick x 16.6 mm high | 0.79" wide x 0.28" thick x 0.65" high |
| Max dimensions | 28.0 mm wide x 7.0 mm thick x 19.3 mm high | 1.10" wide x 0.28" thick x 0.76" high |
| Stall torque (3.8V) | 0.8 Kg.cm | 11 oz.in |
| Stall torque (6V) | 1.5 Kg.cm | 21 oz.in |
| Stall torque (8.4V) | 1.8 Kg.cm | 25 oz.in |
| Weight | 6.4 g | 0.23 oz |
| Lead length | 15 cm | 5.9 in |
| Operating speed (3.8V) | 0.12 sec/60° | |
| Operating speed (6V) | 0.08 sec/60° | |
| Operating speed (8.4V) | 0.07 sec/60° | |
| Operating voltage | 3.8V to 8.4V | |
| Operating temperature | -20 to +65 °C | |
| Bearings | 1 ball bearing | |
| Gear material | Hardened Steel | |
| Case material | 7075 aluminium alloy | |
| Motor type | Coreless DC motor | |
| Working frequency | 333 Hz | |
| Dead band/resolution | 2 µs | |
| Pulse width for ± 60º | 1000 - 2000 µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Potentiometer | |
| Supplied accessories | 4 output arms, 2 arm retaining screws, 4 mounting screws | |
| Optional accessories | Pulley For KST X06 & X08, KST X08 Servo Arm Set, Plastic Frame only for the KST X06, Ply Frame for KST X06 | |
Review by: Bert
Great qualityGreat high speed high torque servos in a very small size. No noise also when in neutral position under load. Very nice set of servos.
Review by: Anonymous
very tiny servosEverything seems allright. Couldn‘t test it so far.
Review by: Trevor
KST X06 ServoHave used KST servos in the past with great results. These X06’s are super light and accurate. They suited my needs perfectly. Also prompt service from Hyperflight!
Review by: Nick.
Great. Fantastic. Outstanding.OK I am a fan of hyper flight, but if your not it's because you haven't used them yet. The X06 is a servo, it's just a servo. Wow no chatting with its friends precisely doing what it's designed to do. Powerful little fellow too. Recommended 😁.
Delivery UK to UK one day. Outstanding 👍.
Review by: Robby B
Lovely little servosI bought a couple of these to replace the 2 Bluebird AMG's in my Elf because the constant buzz of the AMG's finally pushed me over the edge. The KST06's are totally silent and just about fit into the Elf with the lugs still on (with some trimming of the very central leading edge. Lugs left on because I'll rob the servos from the Elf later in the year). I'm quite happy to give up a couple of grams for the extra quality that the KST's offer over the Bluebirds
Review by: Ian Harvey
micro elevator swervoAs usual, good advice from Neil and very happy with this recommendation.
Review by: Robert Rent
Small. light and accurate. Usual excellent Hyperflight sales and shipping.
Review by: Anonymous
Kst06Three words. Precision, Speed, Micro.
Review by: Paul B
KST X06 Servo - 1.8Kg.cm 0.07s 6.4g 7mm.Great Service as always from Hyperflight. These servos certainly compliment the rest of the KST range with a look of quality and very quiet operation, they have been installed using the plastic frames which are available from Hyperflight, make sure you keep the four very small screws supplied with the servo as you need two to hold the servo in the frame(there are no screws supplied with the frame), Not flight tested yet but will work hard being installed in a D40 so time will tell.
Thank You
Review by: Tommy
Usually never buying Mk.I anything but wanted to have slightly smaller servos for elevator and rudder on my newly acquired Progress dlg. First impressions are good, the Kst works very civilizedly and quietly. Much smaller than X08 which helped fitting them in. No flying yet.
Review by: Tony Whittaker
KST NEW 06Just got a pair. I wanted the "iphone11" of small servos, and I got that. Small, quality, quiet, smooth. Fine on 1S lipo. Just what I wanted, the Rolls Royce of DLG servos.
