Freya Elektro 1.5m
Description
- laser cut balsa parts
- laser cut plywood parts
- 3d printed parts
- carbon tubes
- nylon wing bolts
- steel nuts
- bowden cables inners and outers
- control horns
- model building plan (instruction)What you need to have to build and fly:
- 2 x Emax ES9052 , or KST X06 V6,or CHA DS06 servo
- 2S Li-Po battery 600mAh 7.4V 30C JST
- electric motor eg. Redox BLF420/1000 (maximum diameter 28mm)
-- HyperFlight recommended motor: ADH300L Front Mount
- ESC Schnurzz 12A
- 35mm or 36mm spinner (aluminium recommended for the forward weight)
- folding propeller eg. 7x6
- micro receiver (3-channels)
- Oralight or other lightweight covering material
- wood glue
- thin and thick CA glue Technical data:
- flight weight: ~350g
- wingspan: 1500mm / ~ 59in
- length: 900mm / ~ 35,5in
- wing profile: hn1033
- wing area: 24 dm2
- wing loading: 14.5 g / dm2See the photo build manual here.
| Recommended RC | |
|---|---|
| Rudder & Elevator servos | CHA DS06, Emax ES9051, Emax ES9052, Hitec HS-40, PTK 7350-MG-D, Blue Bird BMS-101DMG, Blue Bird BMS-101HV |
| Receiver | 4-5 channel rx to match your transmitter |
| Power | 2S-3S 300-600 mAh LiPo |
Reviews 2
There’s no build instructions. Gotta go off build logs from the internet. Big bummer
Shipping was pretty fast. Delivery address that the label had was incorrect, luckily I saw it and notified sales and they got it redirected. I have been out of the hobby for about 45 years but this is not a beginners kit. You must read the plans well before starting to understand how or what you need to do in what order due to no instructions. You will need to add 3.25 to 3.5” of fuselage length in order to achieve CG and no additional weight. This also allowed for all the equipment to be placed unrestricted directly behind the motor. I added balsa from carbon fiber leading and trailing edges to each rib for additional strength. Due to we travel in a motor home I made the rudder so it’s removable by adding a 2” portion of the 3mm carbon rod to protrude down through tail boom and used a 3/16” piece of rc gas line slipped over it to hold in place below tail boom. Spring pull is my next install in lue of push rods to save weight.
HyperFlight comment: A photo build manual is now available: https://manuals.kohlsrcmodels.com/en/freya-hlg-e-ev
