AndREaS - F3-RES 2m

Product Code: ANDREAS

(3 reviews)

Price: $157.42

Out of stock, notify me when back in stock

Description

The AndREaS is a built-up laser cut balsa and ply glider designed for the new F3-RES high-start launched 2m Rudder-Elevator-Spoiler class now popular in Germany and Austria, and fast spreading to other areas.

The hand selected wood in the Andreas kit is beautifully laser cut and is a pleasure to work with. The precut parts extend to the spar, leading edge and D-Box, making assembly quick and straight forward, with a minimum of sanding required. The 8.5% thick airfoil has been specially developed for the F3-RES class to give high launches and a good turn of speed. With a flying weight of 520 g - 580 g (18 oz - 20 oz) the wing loading can be as low as 15 g/dm2 (5 oz/sq ft). Despite the low loading the thin wing profile gives the Andreas excellent penetration, allowing it to be used in even at higher wind speeds.

The kit includes all pushrods, all small parts, a colour full size plan and richly coloured illustrated building instructions. The English translation is here.

Not included in the kit are adhesives, or RC components. For covering the kit Oralight is highly recommended.

Laser cut all-wood construction with self jigging weight-optimized parts.
Removable pylon mounted tailplane set in front of the fin.
Huge rudder for agile control behaviour.
Two-piece wing with multiple panel breaks and contoured wingtips
D-Box leading edge for maximum laminar flow over the wing.
Sophisticated self-jigging spar for a strong easy to construct wing.
Powerful spoilers give an excellent braking effect and accurate landings.
Colour plan and extensively illustrated, with detailed building instructions (in German).

Check out this RCGroups Andreas build log.

AndREaS Specifications
Wing span	2.0 m	78 in
Wing area	33.8 dm2	524 sq in
Length	115 cm	45.3 in
Flying weight from	518 g	18.3 oz
Wing loading	15.3 g/dm2	5.0 oz/sq ft
Aspect ratio	11.7
Wing airfoil	MB-674RES 8.5%
Dihedral (EDA)	10.5º
Centre of Gravity	70 mm from wing leading edge
Controls	Rudder, elevator, spoilers

AndREaS Typical Weights
Total structure	385.0 g	13.6 oz
Receiver	6.0 g	0.2 oz
Rudder servo	8.0 g	0.3 oz
Elevator servo	8.0 g	0.3 oz
Spoiler servos	16.0 g	0.6 oz
Battery	70.0 g	2.5 oz
Nose weight	25.0 g	0.9 oz
Flying weight	518.0 g	18.3 oz

Recommended RC
Rudder & elevator servos	Ripmax SD100, Blue Bird BMS-101HV, Power HD DSM44, Gening D541BB, KST X08, Ripmax SD150, Corona DS843MG, Graupner DES 261
Spoiler servos (2)	Gening D541BB, KST X08, Ripmax SD150, Corona DS843MG, Hitec HS55
Receiver	4 channel rx to match your transmitter
Battery (4-80g)	Dream-Flight 300 mAh 4.8V NiMH, Dream-Flight 750 mAh 4.8V NiMH, 4 cell Eneloop 500-800 mAh NiMH

More details

andreas-test [614kb]

Reviews 3

17/11/2017 18:31

Review by: Roy Hippert

Just received my second AndREaS today in perfect condition. Thanks Hyperflight. The kit is very well thought out and after getting the translation to English went together beautifully. My came out to be 472 gr. I fly it with the CG at 70mm per the plans and couldn't be happier with it's ability to use even the weakest lift.
Flew it just the other day here in Wisconsin, temp was 37 deg F, light wind, some sun. From a height of about 20m found a trace of lift and took it up to about 400m for a 23 minute flight on a day I really did not expect much.
Great plane, can't wait to get the second one done.

02/03/2017 20:16

Review by: Jim Reagan

AndREaS flies

I got my kit in 5 days (Thanks Neil). My kit was wonderfully laser cut and went together well, thanks to rcgroups, "glidermang" build log. Sanding was somewhat tedious and I skipped using the spoiler servo mounting and linkage. The flying weight (w/ 4.8 AAA cells)came in at 15.85oz. Great flyer that responds to the smallest thermal!

27/11/2016 00:51

Review by: Mark Hamilton

Andreas F3 kit build

The kit is well thought out, using several different types of wood and various thicknesses to best reduce weight and have the necessary strength. Quite complex compared to other laser cut kits, impressive.

Given the different materials, the parts come free and are all nicely cut. A challenging thing to do with so much variation.

Hardware is high quality also. The joiner and tubes fit perfectly, pushrods and horns are well suited.

The kit goes together quickly and the instructions can be translated using free apps. Some apps do not have good aircraft vocabulary but the instructions use many pictures.

The design is modern, light, and graceful. It will be well suited for those light days when no one else can fly.

A lot of work went into this kit. Kudos to the design and production crew.

Mark