Dualsky XM2532EG-16 1550 RPM/V 48g Cased Outrunner

I'm using this motor with a GM9x6 in a 2.5m Aerix with 3S 850mah Tattu batteries. It's just a perfect combo of power and just sips the current too. Very pleased with the quality of the motor and the customer service of Hyperflight.

This motor was purchased for an F5L model, in this case an Eli. I wanted a motor that would give a really good climb even with full ballast using a 2 cell LiHv 70c battery. Combined with a 10x6 GM prop it gets to 100 metres altitude in 15 seconds with 130 of ballast on board. If I used a lighter motor I’d have to add some lead to the nose so it makes sense to use this one. The 25mm case is a nice fit in the fuselage. This motor, plus Dualsky X30 Esc. with a 10x6 prop and a 2cell battery is a great combination.

These are high quality motors, I really like the rear cable entry and it being fully encased, outrunner performance with inrunner peace of mind when installed close to batteries in a small fuselage. Pulls 15 amps at full noise on 2S, 9.5 x 6 prop, own design 2m T tail pod / boom glider, AUW 810 grams, climbs effortlessly at half throttle on the stick.

I’ve used a number of Dualsky motors in my own models and those who I build for.
This motor is fitted to an “Eli” F5L model. Powered by a a 550mAh 70C battery and fitted with a 10x6 GM prop it gets to 100 metres altitude in about 15 seconds. Model weighs 460 grams. I can use that excess time to fly upwind when the conditions need it. Pulls about 16 amps max.

I am not much of an electric person, but I love these motors the power you get out of them is amazing, I have them in most of my gliders and wow, they climb vertical, a must get.

I got the dual sky motor and CN motor mount in the spring. I electrified a "Topaz" RES model built in Ukraine around 2003. I ground off the F/G nose carefully and glued in the CN motor mount. The motor bolted up perfectly. The revised model weighs 42/43 oz and Climbs with alacrity at a 45+ degree angle. An excellent small motor that appears to be well made.

Jerry K

This motor is Awsome for a RES glider...In the meantime I've got three of these..
Dualski for ever in my upcoming gliders!

This XM2532EF-16 is amazing! It gets my own designed R.E.S. (665 grams) in just 7-10 seconds to approximitly 120-150 meters verticaly! It pulls about 24-25 Amperes so on a 900 mah 3 S Lipo pack I get 10-15 climbs! Dualsky from now on!