F5K Pro Powerset with ESC and 6x4 Carbon Prop 34g

The VM F5K power set consists of a pair of VM 6x4 carbon folding prop blades in a VM 25 mm spinner ready mounted onto a 1806 2280 RPM/V racing outrunner. To this a KS 30A speed control running BLHeli32 firmware has been expertly soldered. The battery plug on the ESC is an XT30 but this can be replaced if necessary. The speed control has a 5V 2A BEC circuit to allow normal 5V servos to be used. The BLHeli32 settings on the one we checked were as in the last photo.The total weight of this power set is 33.7 g (1.2 oz). It is highly recommended for use on many F5K electric DLGs.We suggest that a 2S LiPo battery with a capacity between 300 mAh and 600 mAh is used. Hower a 3S 300mAh LiPo can be used but this is pushing things very far and risks overheating the motor, so short runs must be used. We do not guarantee the powerset on this voltage.The supplied M2 motor mounting bolts are too long and can protrude into the motor and damage the windings when using a thin firewall. Either shorten the bolts or use washers to avoid this.DO NOT CONDUCT STATIC POWER TESTS FOR OVER 5 SECONDS. YOU ARE LIKELY TO OVERHEAT IT IF YOU DO.