|162 cm Glider Bag Specifications|
|Dimensions||162 cm long x 10 cm thick x 31 cm high|
|Inside max length||160 cm|
|Material||Heavy gauge nylon fabric|
|Padding||1 cm thick foam|
|Internal dividers||Two padded dividers|
|Internal pockets||Three pockets with Velcro fasteners|
|External pocket||One, suitable for glider fuselage|
|Handles||One either side, in the middle|
|Logo||Yes, HyperFlight or Vladimir's Models|
Review by: Steve MossHyperflight 64" glider bag
Good quality all round, use for my AVA Pro-e 4m will get one for my Circle Dancer 3.6 full house *****
Review by: Anonymous
Excellent product very good quality and excellent service as always, thank you.
Review by: Tony
Expensive yes but so worth it considering models are very expensive this is a must have bit of kit. I should have purchased one of these years ago.
Review by: Gert MulderSuper tassen
Heb een aantal van deze tassen gekocht, met verschillende maten.
Tassen zijn van super kwaliteit.
Review by: IM
excellent as ALWAYS " service & quality from Hyperflight , this bag is perfect for my Circle dancer 3000 ,just the right length for fuse in front pocket, the only minor criticism would be ,the Velcro divided pockets are a bit large & not sealed all the way down, I also cut a piece of the enormously strong cardboard from a box that my Circle dancer arrived in & put it the entire length of the bag at the back too make the bag more ridged as the wing of the Circle dancer 3000 are rather fragile .
Review by: Chris Williams
General Comment - Outstanding Service!
I have placed many orders on Hyperflight from complete F3J/f5J models to small items over the past 4 or 5 years.
Every time the orders have always been processed the same or occasionally the next day if super busy. The items have always been exactly as described on the Website and received super well packed. I believe Neil personally checks every order that goes-out - they've certainly never made a mistake.
Neil through my occasional contact has also shown to be a thoroughly honest person to deal with.
In addition the website works exactly as it should and the range of items is huge. It's also full of useful information on the models and accessories sold so is a ready reference.
Review by: DavekGlider transport bag
These bags are good and well made. Like others, I would like to see back pack straps and additional external compartments for the rest of the gear we carry to the flying site. Fuselage space on the outside is of little use when transporting Scales/semi scale models as the body will not fit into the available pocket. Still a good product, good service and a reasonable price
Review by: Roger James
These bags are of high quality and well worth it They give you the opportunity to place up to 2 sets of wings easily spaced out. The only down side is a lack of a shoulder strap but this is easily overcome by using your tranny strap attached to the handles and as I am short this keeps any v tail off the ground. If space allows another fus can be inserted in the wing part
Review by: j°rgen hvassHyperFlight 162 cm (64") Glider Bag.
Super cool /nice bag.
But I wish the room to the fuselage was bigger.
Super cool bag.
But I wish the room to the fuselage was bigger.
So there is room for a more wide body.
As well as a pair of handles to carry it your back.
Review by: Barry
Great bag very pleased. Such fast service. Well done Hyperflight. I agree with other reviews maybe a few loops for fixing a shoulder strap at least. Wouldn't be to difficult or costly. Its always good to improve a good product.
Review by: Anonymous
Excellent product ... been carrying F3J models in surf board bags ... not ideal.
Ordered a single Hyperflight bag 'to see' ... superb quality ... ordered two more ...
I think in future ordering these bags to suit model size will just be part of the process!
Comment by: patrick
excellent bag, very well made. I am going to use it next month and I think it will be perfect.
Review by: martin christmasnew wing bags and glider carry bag
Just received my new Maxa wing bags that were on back order and received my new VMB162 Glider transport bags, excellent quality on both items.
First class service as usual, thank you Neil and team.
Review by: Nigel TaylorHyperflight 162cm Glider Bag
I purchased this last week, it arrived in 2 days and is a brilliant storage and travel bag for my 3.5m E soaring gliders(I can get 2 in it. Whilst not cheap you get what you pay for, the quality is excellent with plenty of storage for tails, stabs, wing joiners and a small bag of allen keys and spare bolts, wing joining tape etc. I'm going to do a slight mod to add a second fuse tube and put straps to allow me to carry it on my back. Should have bought one years ago. Thanks Hyperflight for an excellent speedy service and for supplying quality items
Review by: kehHyperflight 162cm glider bag
Very pleased with my new glider bag. Excellent quality and looks great and should prevent a deal of hangar rash.
Shame no shoulder strap fittings. I may add my own in the future.
Review by: Steve RogersVladimirs model 162cm glider bag
A beautifully made bag worthy of my Rotmilan, worth the cost for the peace of mind let alone the protection.
The only lack is that I would like a zipped pocket for wing joiners etc.
Review by: Tomas162 cm (64") Glider Bag
Review by: BuffymadforrcWowzers
Ordered on Monday, got it on Tuesday, it was in the slope Wednesday with three moulded gliders in it, made life so much easier, carrying and storing my models in, this bag is a must and not just for moulded models, it can used for any type of racing, thermal or sports model. It's a good I have two.
Review by: MalcGlider bag
Great bag for gliders large and small, would love to these with 2 fus holders an an extra divider inside... Most of us glider nuts take two models so one of these bags could easily be modified to double up.
Comment by: John Urry
Beautifully made and well thought out.
Review by: PiotrHyperFlight 162 cm Glider Bag
Very well made bag. This is a must bag for expensive large RC glider.
No doubt, worth the money spent.
Going to buy another one soon.
Review by: Richard EdmundsPredator Protector
Generally a very well made bag. Could do with an internal pocket for wing joiner/ballast, and an external strap to hold the fin flush to the side of the bag. Excellent service, as always.
Review by: Mike
Nicely produced bag that will carry several models to the slope. Shoulder strap would be a nice addition, but I can do that myself.
Review by: Martin ChurchVladimir's Models/HyperFlight 162 cm (64") Glider
Bought to house my Willow 2 this bag is perfect for
safe storage of its wing fuselage carbon joiner & tail panels.
I was a little concerned initially on cost but when it turned up
it was obvious to see this is a high quality item.
The fuselage compartment has two zip'sat the nose end so you can simply unzip & charge the model whilst still in the bag.
I'd liked to have seen some Velcro straps for securing a vee tailed model with its tails left on as sometimes I need to quickly swap slope sites & removing vee tail panels is a pain if left on in the bag the fuselage can spin round & catch a tail panel on gates etc. It's something I could do myself in fairness.
The inner baffles help keep expensive moulded model wings apart.
There are three of them for a three piece wing.
All in all very good value for the money 5 stars.
Review by: Ron thatcher64" glider bag
Nice sized bag for 4mr models ,the appearance is spot on nice, sturdy zips & padded pockets for the wing sections & elevators. The outside sleeve takes the problems carrying the fuselage & the carrying handles make life easy for transportation.
Review by: NiftyA must have
If I had have known how good this bag is I would've had my glider shipped in it. Fits the Super Ava wings with the center section just making it. Really, I think I would have one of these bags for each glider.
Review by: Mike Crofts
I regard these bags as a necessity every time I fit a new model out. No more hangar rash!
Would be 5 stars but I would like to see a shoulder strap fitted.
Review by: JonasS
The bag is perfect for my 3.8m Xplorer. I get both fuses (F3J and F5J) to fit along each other in the side bay, and the wings fit nicely inside. If there was one thing to wish for, it would be two external pockets for my ballast kit and wing joiners.
Review by: de graeve eddyGlider bag
This glider bag is of a very good quality and saves your expencieve model and is very easy in use.
Review by: Chris LammingCracking bag - perfect for F3f also
Bought for F3f model carriage to and from the slope - it's the perfect size and very well made. The internal pockets make life easy for carrying the few tools you need, meaning only one trip from car to slope - excellent!
Review by: Geoff DoughtyHyperflight Glider carry bag
Received my carry bag in quick time. It fits my Euphoria perfectly.
Great soft internal lining and extraordinarily good material in the bag
This is definitely worth the money and i cannot recommend it highly enough
Review by: Alan Brodiethat bag - yeah baby
No need for wing bags with one of these. At this time of year (winter) carrying the entire glider protected in the bag across the muddy farm fields is so˛oooo much easyier and safe. Would not be without mine ever.
Review by: Smily
Nice bag, good quality. I'm very satisfied.
Review by: ToneGlider bag
Gorgeous capacious bag. Got my Graphite and Mini Graphite wings in no problem. Strong sturdy and does what it says on the ad. thanks Tone
Review by: Robert BloorGlider bags
An excellent product, very well manufactured and top quality material, a must for all glider guiders. the service was extremely good and couldn't be bettered. Thank you Hyperflight for a great buying experience.
Review by: DanyBReally good bag
I like this bag. Good quality. I use it for my ALES 3.4meters glider. More than enough place.
Review by: frank
This is a wonderful product, good finish and sturdy.
Glider is very satisfied with his pack.
Greatings from Belgium.
Review by: Anonymous
I have three bags, happy with all of them. Also happy with the service from Hyperflight.
Review by: Justin BarberVladimir's Models 1620mm (64") Glider Bag
I bought this glider bag back in March when I ordered a Graphite2e. At the time I remember thinking that it was somewhat of an unnecessary luxury.
However when it arrived I immediately had the impression of quality and durability and there and then decided that it was good value for money.
Months later and many trips out with the bag and glider everything is still looking like new - not a dent or mark anywhere! It also keeps everything in one place so just grab the bag and go flying.
Well worth the investment so don't hesitate.
Review by: Martin Hyde
I bought this bag to house my AVA Pro electric soarer.
Although the price initially seems high, the quality and amount of protection it gives, makes it worth every penny.
There's plenty of room inside for my AVA Pro wings plus spare room for another set of wings, if required.
The outer shell is very strong and the 2 internal dividers create 3 well padded compartments for your equipment. One of these compartments also has pockets to hold fins, stabilisers etc. safely.
There's a handy fuselage pocket on the side, which holds a slim fuz nicely - even the AVA Pro electric fuz fits in, as long as your prop blades sit against the fuz sides and are secured with an elastic band.
All in all a great way to store and transport your models without damaging them. Recommended.
Review by: Herwig CuypersPerfect Match !
This bag is the perfect match for my electric Super AVA. It looks like tailor made for this great "Thermal King". And the quality is superb ! Absolutely recommendable!