Prices shown exclude VAT 

Stormbird Forza 2.5m 100"

Product Code: STORMBIRD-100
 (5 reviews)

Price: $783.07

2 in stock
Add to basket to see shipping cost

Available Options

* Layup:
Quantity

Description

Stormbird Forza 100: The next generation high performance 2.5 metre model from successful Aeroic designer, Dr. James Hammond. With a new and highly experienced manufacturer, and continuing technical development of previous designs which have gained him a worldwide following, Dr. James Hammond is very pleased to announce Aeroic’s latest entry into the high-end sports sailplane market; the Stormbird Forza 100”

James specifically designed the now very popular Stormbird as a more modern, and higher performing replacement for the ever-popular Typhoon – arguably the best selling all–moulded 2M ever, that he designed over a decade ago. Now it has been stretched and optimized into the higher aspect ratio Stormbird Forza. Stormbird Forza 100 incorporates all of the great things about the original design – but with a turbo added!

The proof of the Pudding – chuck it and see. From the very first flight the Forza has surprised us.

Armed and dangerous with its massive carbon joiner and a completely new and higher aspect ratio wing planform, newly smoothed aerofoils, and the game-changing sine wave spar, the new “Doc J” weapon is extremely fast - scary fast some have said - and like all Aeroic thoroughbreds its highly aerobatic but lands like a Gentle Lady. Its faster than its smaller brother in acceleration and top speed, slower in landing mode, and with its lower wing loading can fly in lighter winds than the original model.

Overall design:
James has always had an eye for a cool design – if not color – he admits to being “Chromatically” challenged. Stormbird has a highly optimized wing and new and smoothing improved wind tunnel tested aerofoils. The layout has enough room to allow plenty of ballast in the fuse and has ballast tubes in the wings too. The slip on nosecone makes it all easily accessible

Aerofoils:
The sections used are the most developments from James’s highly successful original aerofoil designs: Dial in a millimeter of reflex and see what happens – but don’t forget the replace the battery in your pacemaker first, or drop the flaps to 80 degrees and find you are walking faster than your model.

Wings:
Completely different from the previous design, and made possible by the revolutionary Sine Wave Spar that is now a feature of all Aeroic planes, the optimized and now stretched wing planform has undergone a series of changes throughout the development and testing of the model resulting in the somewhat “radical” shape that we now see.

The reducing thickness, optimally cambered sections will let you go from really slow landing speeds with the flaps down to heart thudding passes with a little reflex, yet despite its ability to carry heavy ballast loads, the airframe will thermal with the best of them. Large ailerons, large flaps and the stretched wing planform each add to the overall performance of the airframe.

Like all Aeroic planes, the “standard” wing is carbon type.
Horns are factory fitted with well thought out geometry to allow flush servo installation using 10mm servos for flaps and the new 8mm type for the ailerons. Using conventional linkages, you can get a clean, practical and most importantly serviceable wing installation optimized to use full servo travel to give high torque and low slop.
Ballast tubes in the wing add to the flexibility.

Aeroic Sine Wave Spar:
Used in several military aircraft, (Doc J’s designer background) the Sine Wave Spar (SWS) has been adapted for the first time to make up the heart of a model sailplane wing, and has frankly amazed us with its low weight, and ultra high strength. Unlike a conventional “Box” spar the Sine Wave Spar adds terrific torsional stiffness and yet actually weighs considerably less than the older conventional spar types. Now used in all Aeroic airframes, the Sine Wave Spar is lighter and far stronger than “conventional” spars and raises the overall performance level another few notches.

Fuselage:
The practical but curvaceous fuse is strong, light, and stiff with Carbon/Kevlar reinforcement and gives far more strength to the boom than most 80” models. Electronics area is 2.4 GHz friendly with access to the radio and ballast through a slip-on nose cone. The long nose area accentuates the rakish lines but also provides plenty of space to easily balance the model without resorting to shoehorning lead in every available crevice!

Snakes and/or rear mounted direct servos can be used for Rudder/Elevator control. These are all positioned to take the ‘head scratching’ out of installing the radio gear. The fuselage ballast tube allows the use of standard 19/20mm round ballast slugs, 8 of them if you need them, which added to the optional ballast in the wings allows nearly 1kg (2.2Lb) capability. Wing stub fairings with location dowel holes finish the fuselage with recesses for “green” Multiplex type connectors to connect the electronics pre-routed.


Tailplane:
As normal the aerofoils were specifically designed for Aeroic sailplanes and optimized for maximum control response with minimum deflection. At 10%, the tail aerofoil section is thicker than is the norm but the infinitesimal increase in drag is easily offset by the increased control response for less deflection.
To further increase the efficiency, pitch control is accomplished by using an elevator not a wobbly all-moving tailplane. The elevator is directly driven by a servo placed in a hatch in the fin to give solid elevator control.

Joiner:
Like all Aeroic planes, the Forza has an impressive joiner that can now hold ballast slugs – if you ever run out of ballast space with this airfame!
Massive is the only way to describe this part. Measuring 35 x 12mm, the length has also been increased by over 100mm (4”)
It’s as big if not bigger than those used in most 3m competition airframes!

Production:
The Stormbird Forza has been designed with far greater capability potential than any average sports model, and this, coupled with the fact that like all Aeroic sailplanes the pre-production models underwent thorough testing, not only in flying performance, but also in making the installation straightforward and practical, leads to an airframe that is a snip to fit out, and flies like the true thoroughbred it is. It is supplied with a ballast tube, a wiring harness and some control linkage hardware.

Usually available in Standard and WMD wing layups. The latter is approx 250g heavier than the weight listed below. It was also reported that approx 200g of noseweight is required.


Stormbird Forza Specifications
Wing span 2.50 m 100 in
Wing area 44.7 dm2 723 sq in
Length 123 cm 48.4 in
Flying weight from 1800 g 63 oz
Aspect ratio 14
Wing airfoil JH3680, JH3575, JH3670
EDA (dihedral) 1.7º
Centre of Gravity 85 - 100 mm from wing leading edge
Controls Rudder, elevator, ailerons, flap
Ballast (Fuselage) 3/4” (20mm) round slugs
Ballast (Wings) 7/16” (12mm) round slugs


Stormbird Typical Weights
Fuselage inc pushrods 286 g 10.1 oz
Left wing 450 g 16 oz
Right wing 450 g 16 oz
Tailplane 55 g 1.9 oz
Wing joiner 137 g 4.8 oz
Ballast tube 40 g 1.4 oz
Accessories 60 g 2.1 oz
Total structure 1318 g 46.5 oz
Wiring 20 g 0.7 oz
Pushrods 12 g 0.4 oz
Receiver 8 g 0.3 oz
Rudder servo 11 g 0.4 oz
Elevator servo 11 g 0.4 oz
Wing servos (4) 70 g 2.5 oz
Battery 150 g 5.3 oz
Flying weight 1800 g 56.4 oz


Recommended RC
Rudder & Elevator (servo body max 23 mm x 12 mm) MKS HV6125e, MKS DS6125e, KST DS215MG, KST X12-508, KST MS320, Blue Bird BMS-126WV, Blue Bird BMS-127WV
Flap (servo max 10 mm thick) MKS HBL6625, MKS HV6130, KST DS125, KST X10
Aileron (servo max 8 mm thick) KST X08 Plus, KST X08
Receiver 6 channel rx to match your transmitter
Power Overlander 2S 1000mAh, Radient 1600 mAh 6V, HyperFlight 2200 mAh 4.8V, 1600 mAh 2S LiFe
Servo frames, if supplied, fit KST DS125 and X10 sized servos.

Reviews 5  


 Review by:

Finally got round to first flight of stormbird today due to lock down and I must admit a bit of trepidation about having spent so much and whether my flying skills were up to it .
Well , what a plane flew perfectly and to be honest a lot easier than I expected ( I usually fly balsa or foam) now my favourite plane by far , if, like me ,you are wondering if the expense is worth it the answer most definitely is yes !!!


 Review by:

Storm bird Forza

Excellent service from Hyperflight as usual, good levels of stock of models and accessories. This model does not disappoint, looks good goes together well and flies great. First flight without ballast in 22mph wind was brilliant, second flight with 11oz ballast in 24 mph wind was even better. Got 12mm brass rod for wing ballast but needed to grind down to 10mm, 5 1/2 oz in each wing. MKS 6130 for flaps, KST X 08H for ailerons and KST X12-508 for rudder and elevator. A 1600 Life batt and a couple of ozs lead in nose balanced it as per instructions and no trim change was required.


 Review by:

First Impressions

Fit and finish is top notch for the money. Wings are very nice and the WMD version is extremely stiff with little weight penalty, 8 mm servos are required for the ailerons. Nice to find that a wiring loom was included with the kit, but curiously no snake for the rudder although snake ends are included. No problems with the factory fitted horns which speed up the building process. The fuselage is ideal for modern hi voltage set ups with lots of space for long Lion batteries, a small powerful servo is needed for the elevator as installation is quite tight.


 Review by:

First Impressions

Fit and finish is top notch for the money. Wings are very nice and the WMD version is extremely stiff with little weight penalty, 8 mm servos are required for the ailerons. Nice to find that a wiring loom was included with the kit, but curiously no snake for the rudder although snake ends are included. No problems with the factory fitted horns which speed up the building process. The fuselage is ideal for modern hi voltage set ups with lots of space for long Lion batteries, a small powerful servo is needed for the elevator as installation is quite tight.


 Review by:

Delivery was very fast :)


Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form