|Schloiderding V2 Spinthing Specifications|
|Wing span||1.20 m||47 in|
|Wing area||14.9 dm2||231 sq in|
|Length||86 cm||34.0 in|
|Flying weight from||131 g||4.6 oz|
|Wing loading||8.8 g/dm||2.9 oz/sq ft|
|Centre of Gravity||57-61 mm from wing leading edge|
|Schloiderding V2 Spinthing Typical Weights|
|Total structure||105.0 g||3.7 oz|
|Receiver||5.0 g||0.2 oz|
|Rudder servo||4.5 g||0.2 oz|
|Elevator servo||4.5 g||0.2 oz|
|Battery||12.0 g||0.4 oz|
|Noseweight||10.0 g||0.4 oz|
|Flying weight||131.0 g||4.6 oz|
|Recommended R/C-nano gear only|
|Elevator & rudder servos||Ripmax SD100, Blue Bird BMS-101AMG, Blue Bird BMS-101DMG, Blue Bird BMS-101HV|
|Receiver||Spektrum AR6260*, AR6100e, AR400, Futaba R6004FF*, Orange DSM2 compatible, Jeti Duplex R4 & R5, Multiplex Mlink RX-6-DR Light*, FrSky D4R II|
|Battery||HyperLipo 2S 175 mAh, HyperLipo 2S 300 mAh, 150 mAh 4.8V, Dream-Flight 300 mAh|
Review by: Mark.Kit contents.
Great value kit. A really good route, albeit self build, to get into DLG without spending a premium. The kiy parts are of high quality as are the plans. As usual great packaging from Neil. Merry Chrimbo.
Review by: Jean DoraisGreat buy!!!
Received from Neil in 4 days (to Canada!) in box-in-a-box packaging- absolutely no damage.
The model goes together very quickly, but be prepared to sand the wing to proper shape. The included wing sanding tool was cool, but it was just easier to use a sanding block- your mileage may vary. I did use the tool to verify the wing profile , just not for sanding.
Also be prepared for absolutely no instructions being included- if this is your first kit, it might be a little difficult, otherwise it goes together very quickly. The links that Neil posted are very helpful. The full-size plans are great and include the 3 wing options.
I've just completed the kit (120cm version) but have not flown it yet- the weather has been dreadful in Ottawa. I will update with a flight report when able.
I don't think you can go wrong with this kit- great value for your money!