Prices shown exclude VAT 

Spin Mini DLG including 4 servos and wing bags

Product Code: SPIN-DLG
 (add a review)

Price: $426.60

6 in stock
Add to basket to see shipping cost

Available Options

* Colour: logo and fin:
Quantity

Description

The Spin Mini DLG is a new molded 1m discus launched glider from Vladimir's Models. The Spin is supplied with four SD100 servos and Spin Wing Bags. The Spin is a great intro to DLGs and is probably the easiest aileron DLG to get airborne. In addition to a very quick and easy build the model excels in the air, with a high launch, a good glide angle, and brilliant manoeuvrability allowing it to be flown and aerobatted, from the smallest flying site.

The Spin's wing is a fabulously light all molded carbon fibre miracle of construction. Despite its excellent ultra smooth finish and extreme stiffness it only weighs 54 g, just 2 g more than the Elf's film covered wing. The great finish and low drag section provide a great all round performance improvement. The ailerons/flapperons allow better control and camber adjustments vastly improve the speed range. The aileron servos fit in a beautifully engineered pocket in the root underside of the wing. This is designed for Ripmax SD100/Dymond D47 servos which fit perfectly.

The Spin's pod and boom fuselage is uses attractive plastic moldings for the pod and removable nosecone. These are an excellent fit and follow the wing underside contour for a gap free fit. The tailboom is a tapered wrapped carbon tube with a pre-cut slot for the fin, and has a flattened front section for mounting the R/C equipment. The fin is made from rigid foam with carbon spars and has smooth vac-bagged glass covering, and incorporates the rudder with a very free living hinge. The foam/carbon/glass tailplane has a separate elevator and is mounted above the boom using a tiny standoffs to minimise interference drag. All pushrods and control horns are included.

The model comes with a complete accessory pack and a servo tray designed for Ripmax SD100 or Dymond D47 servos. An instruction manual is not available but there is some useful info here. Please don't try to order direct from VM, they will refer you back to us. The model comes with a complete accessory pack including even special extension leads for the wing servos.

THE SERVOS AND WING BAGS ARE SUPPLIED WITH THE MODEL AND INCLUDED IN THE PRICE SHOWN. The servos are shown out of stock because we have reserved them for Spin and Elf Pro customers. We decided to bundle the SD100 with the model as the servo mounts are designed for this servo and sourcing them is very difficult. If you already have SD100, D47 or TM1118 servos and you don't need more let us know and we will supply the model without servos.

Spin Mini DLG Specifications
Wing span 1.0 m 39 in
Wing area 11.9 dm2 184 sq in
Length 72 cm 28.1 in
Flying weight from 140 g 4.9 oz
Wing loading 11.8 g/dm 3.9 oz/sq ft
Aspect ratio 8.4
Wing airfoil AG12 AG13, AG14
EDA (dihedral) 7.5º
Centre of Gravity 61-64 mm from wing leading edge
Controls Ailerons, rudder, elevator


Spin Mini DLG Typical Weights
Fuselage 25.5 g 0.9 oz
Wing 50 g 1.8 oz
Tailplane 4.7 g 0.2 oz
Fin 2.9 g 0.1 oz
Accessories & glue 9.5 g 0.3 oz
Total structure 92.6 g 3.3 oz
Receiver 5.6 g 0.2 oz
Rudder servo 4.7 g 0.2 oz
Elevator servo 4.7 g 0.2 oz
Aileron servos (2) 9.4 g 0.3 oz
Battery 17 g 0.6 oz
Nose weight 6 g 0.2 oz
Flying weight 140 g 4.9 oz


Recommended R/C-nano gear only
All servos (4) Ripmax SD100, Dynond D47
Receivers 4+ channel rx to suit your transmitter, eg FrSky G-RX6, FrSky X4R, Futaba R2106GF, Orange DSM2 compatible, Jeti Duplex R5, Multiplex Mlink RX-6-DR Light
Electric battery 2S 175 mAh - 350mAh LiPo, HyperLiPo 2S 300 mAh LiPo


Spin Control Throws & Mixes
Rudder 8 mm each way
Elevator 9 mm up / 7 mm down
Roll ailerons 12 mm up / 11 mm down
Landing ailerons As much down as possible (30 mm)
Snap-flap mix
(elevator->camber)
Full up elevator gives 2mm increased camber
Recommended aileron camber settings. Down=Flap TE down.
Speed 1 mm up
Cruise 0 mm
Slow cruise /thermal 1 mm down
Recommended throttle limiting mix Full throtttle stick gives 60% max throttle throw (1.6mS)

Reviews 0  


Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form