Prices shown exclude VAT 

0.71mm ID Etched PTFE (22 AWG Bondable PTFE) Pushrod Outer Tube

PTFE-TUBE-22L
Product Code: PTFE-TUBE-22L
 (26 reviews)

Price: $2.41

More than 30 in stock
Quantity

Description

Low friction 0.71 mm ID PTFE tube suitable for pushrod outers on discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.

This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.

Can be stretched to 2 times the original length to reduce the weight per meter, and tune the inside diameter to be a perfect fit for the inner pushrod. Sold by the meter. Enter a quantity of 3 for a 3m roll.

22L Etched PTFE Tube Specification
Inside diameter 0.71 mm 0.028 in
Wall thickness 0.15 mm 0.006 in
Outside diameter 1.05 mm 0.041 in
3X Stretched ID 0.46 mm 0.018 in
Suggested pushrod inner 0.5mm Carbon Rod 24 SWG or thinner Piano or SS wire
US size 22 AWG L type (Lightweight)
Weight per m 1.0 g per meter


Dealer discounts available for orders of 30m or more.

Reviews 26  


 Review by:

PTFE Pushrod Tube

A1 service and shipping, goods arrived well packaged in a sturdy cardboard container. High quality product, specifications as described. Recommendable.


 Review by:

Best DLG solution.


 Review by:

Brilliant product, brilliant service

I read about this in RCM&E. I am installing ‘pull pull’ aileron controls into an SE5a (3ft span) and previous experience with fishing wire did not bode well. This tubing however is exactly what was needed to provide minimum resistance for 4 ailerons off a single micro servo. Tests are excellent, but a way to go yet before it’s proven in the air.


 Review by:

Best for pushrods in DLGs


 Review by:

Not used it yet but really nice low friction tubing, will be using mine to protect my pull spring cable from rubbing on carbon.


 Review by:

Great product plus quick and efficient service means I'll be coming back for more when I need it!


 Review by:

0.71mm ID Etched PTFE Pushrod Outer

Great stuff; finally it's available on roll and not in precut length.I always have some of this in stock, just in case.Getting the wires through an F3k fuse is so easy with this. It took a bit time from order to arrival but that's when you order during christmas-time.


 Review by:

Had a bit of an issue trying to pay from the U.S., but Neil was more than quick to resolve and have my order shipped in an impressive amount of time. REAL Service!! Thanks.


 Review by:

Good solution for pushrod outer tube. Versatile options for installation either inside booms or outside. Prompt dispatch and great packaging. Thanks.


 Review by:

Fantastic solution when paired with .5mm carbon rod for smooth, slop free control run. Great dispatch and packaging from Neil.


 Review by:

Sheathing

I was disappointed that there wasn't but a 1 meter piece. I should have read the discription more closely. The picture was deceiving.


 Review by:

Outstanding product and prompt shipment, will DEFINITELY be ordering again.


 Review by:

Works well.


 Review by:

.71mm ID Etched PTFE (22 AWG Bondable Teflon)

Running a tube and pushrod inside a 1/8" balsa 'T' tail structure - a neat solution made possible by this product. Thanks for your excellent service - the model's maiden was last weekend!


 Review by:

teflon tubing

purchased this teflon tubing for my mini topsky,great product for dlg carbon boom push rods assembly,will glue easy with ca glue to the boom, would purchase this product again,many thanks hyperflight.


 Review by:

Excellent product, Item as described, fast shipping and delivery (to Croatia… now EU member). Stretching really easily and adjusting to desirable wire diameter. I prefer to oil the wire before inserting in tight stretched tube.


 Review by:

Excellent product, Item as described, fast shipping and delivery (to Croatia… now EU member). Stretching really easily and adjusting to desirable wire diameter. I prefer to oil the wire before inserting in tight stretched tube.


 Review by:

Works well

I used this together with the "24SWG 0.56mm Stainless Steel Wire " for elevator/rudder pushrods. They work great together, though I'll probably be converting to a pull/spring to save on weight and get the lead out of the nose!


 Review by:

Teflon sleeve

For a long time I use the teflon sleeve for DLG pushrods and bigger projects. Have tried it from different suppliers. This one are perfect quality, easily stretch if needed and well bondable with CA.
Good service as well. Thanks.


 Review by:

Teflon sleeve

For a long time I use the teflon sleeve for DLG pushrods and bigger projects. Have tried it from different suppliers. This one are perfect quality, easily stretch if needed and well bondable with CA.
Good service as well. Thanks.


 Review by:

Goods arrived excellent condition, in four working days, which. considering the fact that we are nearly on Mars and you guys are underwater, is pretty smart service.


 Review by:

Very good service and a quick delivery to Australia - thanks


 Review by:

it's ideal for DLG

It is very good tube for DLG. I like it. Thanks to Hyperflight. Delivery speed is amazing.


 Review by:

1.1mm ptfe tube

Superb product for the job of remotely controlling points,definitly the best yet tried.


 Review by:

Best pushrod housing. Light, low friction and easy to install with CA glue.


 Review by:

Teflon Pushrod Outer Tube

A basic item in many ways. However vitally useful
and does what it says on the tin i.e. makes pushrods glide like
the precision DLG they control. What is less commonplace is the
immaculate way they arrived - neatly coiled and taped together with the ss pushrod wire ordered at the same time, in a tailor-made flat box.
Packed with less care and the wire would spring open and be ruined with kinks and bends. These things matter and Hyperflight takes the trouble.


Related Products 0

Shop Securely

Follow Us

facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form