|12L Etched PTFE Tube Specification|
|Inside diameter||2.16 mm||0.085 in|
|Wall thickness||0.2 mm||0.008 in|
|Outside diameter||2.56 mm||0.101 in|
|Suggested inner||1.5 mm & 1.8 mm Carbon Rod & tube||14 SWG or thinner Piano or SS wire|
|US size||12 AWG L type (Lightweight)|
|Weight per m||3.3 g per meter|
Review by: Jim PatrickEtched Teflon Servo-rod guide
The best lightweight guide for carbon or steel tail pushrods. Great stuff. Hyperflight is the only stocking supplier of this, and they shipped very fast and reasonably to the USA. Definitely opened my eyes to Hyperflight as a shop for Americans looking to get quality RC supplies.
Review by: alf griffith
very nice tubing ideal for closed loop wire
Review by: d bradburyouter tube
used this before and is a must fore the purpose intended
Review by: JohnBondable tubing
Excellent product fits 0.060 carbon very well.
Very fast service, I'm in the USA and purchasing and shipping was easy and fast.
I'll definitely be ordering again from Hyperflight
Review by: J BarrowSuperior bowden cable outter tube
I was searching for a suitable push rod system for use on a carbon tube tailboom when I came across this PTFE tubing which when combined with a 1.5mm carbon rod is the most friction free "snake" system I have ever fitted. As the site details suggest the outter tube can be secured to of the fuzelage using low- viscocity cyano which I ran (poured)down the etched outter wall of the tube and wherel adhered to the walls of the carbon tail boom where it touched. This system is far superior to any commercial product where is is suitable to use a carbon rod as the push rod