A pair of high quality aluminium pushrod ends with M2 threads cut at one end and a tube to take a 3mm carbon rod (or other material).
Note two aluminium pushrod ends only are supplied, carbon rods and clevises must be purchased separately. Suitable for 3 mm carbon tubes or rods. Glue using epoxy or thick CA. Degrease before gluing.
| 3mm Long Pushrod End Specification |
|---|
| Pushrod hole size |
3.05 mm |
| Pushrod tube length |
19 mm |
| Threaded portion length |
9.0 mm |
| Overall length |
36.4 mm |
| Thread size |
M2 |
| Weight (each) |
0.72 g |
