| KST X10 V8 Wing Specifications | ||
|---|---|---|
| Body dimensions | 30.0 mm wide x 10.0 mm thick x 39.0 mm high | 1.18" wide x 0.39" thick x 1.54" high |
| Max dimensions | 42.0 mm wide x 10.0 mm thick x 42.0 mm high | 1.65" wide x 0.39" thick x 1.65" high |
| Stall torque (4.8V) | 6.2 Kg.cm | 86 oz.in |
| Stall torque (6V) | 7.5 Kg.cm | 104 oz.in |
| Stall torque (8.4V) | 10.8 Kg.cm | 150 oz.in |
| Weight | 28 g | 0.99 oz |
| Lead length | 15 cm | 5.9 in |
| Operating speed (4.8V) | 0.16 sec/60° | |
| Operating speed (6V) | 0.14 sec/60° | |
| Operating speed (8.4V) | 0.12 sec/60° | |
| Operating voltage | 4.8V to 8.4V | |
| Operating temperature | -20 - +65 °C | |
| Bearings | 2 ball races | |
| Gear material | Hardened steel | |
| Case material | 7075 aluminium | |
| Motor type | Coreless DC | |
| Working frequency | 333 Hz | |
| Dead band/resolution | 2 µs | |
| Pulse width for ± 60º | 900-2100 µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Potentiometer | |
| Supplied accessories | 2 strong plastic output arms, 1 metal arm, 2 arm retaining screws, 3 mounting screws | |
| Optional accessories | Ply Frame for KST X10, Integrated Drive System/Mono for the KST X10, Frame with bearing for the KST X10 | |
Review by: Richard Wade
Initial impressions are goodI purchased these servos as an upgrade for my Dorado. A fast and smooth running servo with very little slop during ground testing. Yet to try in flight but based on what I have seen thus far I think they'll be just fine. Service was very efficient and prompt.
Review by: Richard Edmunds
HarrierHave these in my Baudis Skywalker and performing well. Much cheaper than MKS, and in my experience more reliable. Fast delivery as usual.
Review by: Gudmund
When ordering here, I know what I get🙂.
Five stars for both service and servos!
Review by: Kristen Thorrud
Excellent service. Fast shipment. Very good servo, no backslash.
Review by: Kristen Thorrud
Excellent service. Fast shipment. Very good servo, no backslash.
Review by: Svein M
KST X-10Steady durable servo. Have had lots of these in wings, gliders 3 - 6 meters. Never problems.
Review by: Steve S
Kst x10 servosGreat servo have had a few of these now and all have been great.
Fast delivery and service what more could you want! Well done hyper flight 👍 top job
Review by: Ben R
Great budget wing servosI decided to see what you got for your money and opted to install two X10s into my old Calypso 6. I bought the IDS for them as well and they're really fantastic for the money. They're strong and fast and do the job really well. The build quality isn't 5 stars (hence the 4 star review) but they're good enough for this particular job for me.
Great service from Hyperflight as well. Top job :)
Review by: sean Spence
Best value for moneyThank you Hyperflight for bring in this product , great value for money , centers perfect , Dam strong .using in a 4m Fox and it is super
Review by: svein Morten
KST X10 perfect wingservoSuper service and top products at Hyperflight
