| KST DS113MG V6 Servo Specifications | ||
|---|---|---|
| Body dimensions | 24.0 mm wide x 12.0 mm thick x 22.0 mm high | 0.94" wide x 0.47" thick x 0.87" high |
| Max dimensions | 32.0 mm wide x 12.0 mm thick x 33.5 mm high | 1.26" wide x 0.47" thick x 1.32" high |
| Stall torque (4.8V) | 2 Kg.cm | 28 oz.in |
| Stall torque (6V) | 2.5 Kg.cm | 35 oz.in |
| Stall torque (8.4V) | 3.5 Kg.cm | 49 oz.in |
| Weight | 15.4 g | 0.54 oz |
| Lead length | 10 cm | 3.9 in |
| Operating speed (4.8V) | 0.13 sec/60° | |
| Operating speed (6V) | 0.11 sec/60° | |
| Operating speed (8.4V) | 0.09 sec/60° | |
| Operating voltage | 4.8V to 8.4V | |
| Operating temperature | -10 to +65 °C | |
| Bearings | 1 Ball bearing | |
| Gear material | Aluminium alloy / copper-bronze alloy | |
| Case material | Strong plastic | |
| Motor type | Cored DC motor | |
| Working frequency | 333 Hz | |
| Dead band/resolution | µs | |
| Pulse width for ± 60º | 800-2200 µs | |
| Digital | Yes | |
| Programmable | Yes | |
| Position feedback | Potentiometer | |
| Supplied accessories | 3 plastic output arms, 2 arm retaining screw, 4 mounting screws | |
| Optional accessories | KST Plastic Servo Arm Set | |
Review by: Rex
Good ServosGreat value from KST. Very smooth, accurate servos with adequate power for most soaring models.
Review by: Kev
Nice little budget servo which went in one of my cheaper slopers, does the job perfectly with no issues.
Fastest delivery on planet Earth from Hyperflight.
Review by: Gary
Kst ds113mg3 out of 4 have failed in a wot 4 foam e within 6 months, so not very impressed at all.
Review by: Anonymous
Servo KST DS 113 MGExcellent service and servo meets all my expectations.
Review by: Richard George Edmunds
FLYING WINGHave always bought KSTs as they are great spec & value and very reliable. A cheap solution to a 2 servo a/c
Review by: Anonymous
Good quality servos at a very good price
Review by: Richard
Feather weight, lightweight on the pocket too .Excellent little servo for lightweight gliders. Half the price of HiTec equivalent. Pulls over 2 kg. Metal geared. Eleven quid each ! What's not to like ? Richard O. Wales UK.
Review by: Tomaz C.
KST DS113MG ServoGood servo and not too expensive.
Review by: George Young
Great value servo. Very smooth in operation compared to the Multiplex ones it replaced which are more than twice the price.
Review by: Richard Edmunds
Compact and powerfulI moved over to only using KSTs a few years ago. Small and light but good power and quality build. Great value. Neil’s speed of delivery is always 1st class
Review by: Elliot
Hitec alternativeHalf the price of the carbonite hitec equivalent, this is a great little metal geared servo, in the tail of my funray they fit perfectly, well pleased.
Review by: Tomi
good servo for that price, but it is not good for professional use. Servo arm is not tight to the crank
Review by: John Lee
Good little servo, working well in a quick foamy aerobatic model. Excellent service as usual from Hyperflight.
Review by: Anonymous
Average or perhaps even sub-average servo.
Centering: not too good.
Slop in gear train: Yes!
However it seems that it is at least as strong as the specs sa, and it runs smoothly.
Review by: Ian W
Reasonably priced, fairly fast, they seem to work fine, and have no slop at all, though I would hope not with a brand new servo. The travel however, feels a bit notchy, which doesn't inspire me with confidence for the long term.
Review by: H Storey
kst DS113MG Servo 12mm 12g 2.2Kg.cnExcellent value I would recommend them highly Top notch service
Review by: Anonymous
Service OK
Review by: Peter Herbert
ServiceFirst rate service
Review by: Markus Slattner
KST DS113MG Servo - 12mm 12g 2Fast sending, good communication.
447821351341
sales@hyperflight.co.uk
Contact Form
