Hyper Spinner Specification | |
---|---|
Diameter | 32 mm |
Motor shaft | 5 mm |
Prop twist | 0° |
Distance across hinge pins | 27 mm |
Prop hinge pin diameter | 3 mm |
Prop blade root width | 8 mm |
Weight | 11.6 g |
Max power | 1000 W |
Review by: Jan
HyperSpinner Power for F5J 32mm/5mm shaftI have bought a several such spinners in recent years and I am very satisfied with this product. The 32 mm diameter fits perfectly on my Maxa, the 30 mm on my PLus X and the 38 mm on AVA Pro. In conjunction with XPower 2919/10 and GM 11x6 it is great power unit for F5J up to 1500g RTF.Easy installation, great durability and a nice look with the possibility of color matching with the fuselage by colored cones.
Another big advantage is the small hinge spacing, which significantly reduces the current drawn.
In some cases it is necessary to adjust the propeller cutout with a sharp knife to allow the propeller to swing completely, but due to the material of the conus, it's very easy.
Neil's Hyperflight works great, the goods are shipped immediately and the range is traditionally excellent. 100% satisfaction.
Comment by: Chris
I bought this for my F5J Viator glider , with Xpower motor and Aronaut 10x6 folding prop. I had to cut out areas around the hinges to allow blades to fold back freely to the fusulage sides , but this was a easily done and the final appearance is excellent. Would have preferred a choice of colour rather than the option of paying for another replacement spinner.
Review by: Ferruccio Petazzi
excellent quality, great service
Review by: Jan
Hyper Power spinner 32mm/5mmI bought this spinner for my F5J glider Fortuna with motor XPower F2919/10 and Vitaprop 11x6". Spinner is very precisely made and fit to my glider flawless. Additionally distance across hinge pins is only 27mm which decrease power consumption against my old spinner with distance 36 mm.
Review by: Krzysztof
High quality
Review by: Ian
Excellent. Very nicely made and fits GM 16x8 blades perfectly in Maxa 4E Pro.
Review by: Givi maisuradze
32mm HyperSpinner Power for 5mm shaftsgood
Review by: Viktor
My favorite spinner.
Review by: Vincent
Awesome product ! Perfectly fit my model requirement !
Review by: Marco Moschetta
HyperSpinnerExcellent choice for my new MAXA 4 pro
Review by: Anonymous
I've two of these previous so I will order again perfect for my new F5J very easy to install
Review by: Gary Binnie
Well engineeredExcellent well engineered spinner. An added bonus that is not in the item description is that the spinner cone retains the blade hinge pins where other spinners use nuts. No spinner trimming needed with GM 16 x 8 blades.
Review by: Derek
1st point of contactI have been delighted with the quality of service, attention to detail and guidance provided by Hyperflight. Can only recommended them with the highest star rating. I am sure that if there might be any problems then it will be sorted out with your satisfaction. I shall continue to consider visiting the shop/website in the future for more advice and purchases. D
Review by: Jamie Mercado
I like the fact that the prop folds back closer to the body of the fuse, it's well made and lite. I did need to trim the plastic spinner to give clearance for the prop when extended and also had to put a groove in the motor shaft to keep it from coming off when powering up. I plan to use them again on my future builds. Great customer service too, thanks Neil.
Review by: Bjorn Tore Hagen
32mm Hyper SpinnerExcellent quality on the spinner.
Fast shipment. Only two days, directly in my mailbox.
Nice!
Review by: Junichi Takano
Hyperflight sent the spinner to me very quickly
after my order.
Thank you.
Review by: Bob Tito
great as expectedI have several of these great spinners, but for the new supra i needed a smaller one. within days delivered to the Netherlands as always.
Great service as always!
Review by: PeterS
Excellent quality!
Review by: Mel G
Lovely machining - quality item runs true.