HyperCover Transparent Yellow Covering Film

Product Code: HYPER-TRANS-YEL

(1 review)

Price: $11.70

Description

A 200 cm x 65 cm roll of Transparent Yellow HyperCover covering film. We have sourced this economical easy to use iron-on covering as the alternative European manufactured film is becoming rather expensive.

This is reasonably light weight covering weighs approx 48g/m2 - about 33% more than Oralight, but is less than half the price. It covers well and is suitable for electric RC models and R/C gliders.

This covering material has backing sheet that must be removed before use. Do not allow the material to stick to itself before placing it on the balsa structure as separating it is hard. The glue rear coating has a strong heat-activated glue and should be applied with a modelling iron set to 90°C to 120°C for tacking the sheet in place, and 150°C for shrinking.

HyperCover Transparent Yellow Covering Film Specifications
Colour	Yellow
Length	200 cm	78.7"
Width	65 cm	25.6"
Weight	48 g/m2	0.16 oz/ft2
Packaging	Supplied rolled

Reviews 1

22/01/2024 17:48

Review by: Chris W

Hypercover Transparent yellow

I was a bit reluctant to use this covering due to the lack of reviews but I bought the yellow and red and set about covering the Eli RES kit. It was excellent to use in all respects and gave a great finish. Plenty of adhesion and easy to work, even on the undercamber of this model. I did use some 'Hi Tack' for some extra adhesion on the undercamber though probably not necessary. So yes, would recommend and less than half the price of Oralight. I tacked it at 115 degrees and shrank at 130 degrees.