HyperFlight 40A BLHELI-32 ESC with SBEC

The HyperFlight 40A BLHELI-32 SBEC ESC is a lightweight brushless speed control with a 6V 3A SBEC running the renowned BLHeli32 firmware. The ESC has been setup for glider operation with the brake on and has a XT60 connector ready fitted.

This ESC is unusual in being a modern lightweight efficient drone type ESC and having a 3A high voltage switching battery eliminator circuit (SBEC) fitted. This makes it ideal for all high performance aircraft where speed control weight and size need to be minimised.

Ready programmed with brake set. No programming required (or possible without an Arduino).

HyperFlight BLHeli32 40A ESC with SBEC Specification
Continuous Current	40A
Peak Current	44A for 10 seconds
Battery	2S - 4S LiPo
SBEC	6V @ 3A
Weight inc leads and XT60 plug	11.3g
Weight ex leads	4.8g
Firmware	BLHeli_32
Programmable	Yes, with an Arduino or our BLHELI-USBprog interface
PCB Size	33mm * 14mm
Battery connector	6 cm wires, XT60 plug/socket fitted
Motor connector	lands on PCB
RC wire length	15 cm