|Fresh F3-RES Specifications|
|Wing span||2.0 m||79 in|
|Wing area||35.6 dm2||552 sq in|
|Length||130 cm||51.2 in|
|Flying weight from||435 g||15.3 oz|
|Wing loading||12.2 g/dm2||4.0 oz/sq ft|
|Wing airfoil||AG36mod / AG37mod|
|Spinner dia (el version)||30 mm|
|Centre of Gravity||70 - 74 mm from wing leading edge|
|Controls||Rudder, elevator, spoiler|
|Fresh F3-RES Typical Weights|
|Bare structure||285.0 g||10.1 oz|
|Covering||45.0 g||1.6 oz|
|Total structure||330.0 g||11.6 oz|
|Wiring||10.0 g||0.4 oz|
|Receiver||6.0 g||0.2 oz|
|Rudder servo||5.0 g||0.2 oz|
|Elevator servo||5.0 g||0.2 oz|
|Spoiler servo||9.0 g||0.3 oz|
|Battery||55.0 g||1.9 oz|
|Noseweight||15.0 g||0.5 oz|
|Flying weight||435.0 g||15.3 oz|
|Rudder & elevator servos||Ripmax SD100, Blue Bird BMS-101DMG, Blue Bird BMS-101HV, Blue Bird BMS-A10H, Graupner DES 261|
|Spoiler servo||Blue Bird BMS-101DMG, Blue Bird BMS-101HV, Blue Bird BMS-A10V, KST X08|
|Receiver||4 or 5 channel receiver to match your transmitter|
|Battery||HyperFlight 750 mAh 4.8V, Dream-Flight 300 mAh 4.8V NiMH, Dream-Flight 750 mAh 4.8V NiMH, HyperLipo 2S 300 mAh, 4 cell Eneloop 500-800 mAh NiMH|
|Electric Version Powertrain Recommendations|
|ADH300L / MM1914-1100 Front Mount||2S 600mAh LiPo, 9x5 folding prop|
|ADH300L / MM1914-1100 Front Mount||3S 450mAh LiPo, 8x4 folding prop|
|Hacker A10-7L geared 4:1||3S 450mAh LiPo, 12x10 folding prop|
|Hacker A10-7L geared 4:1||3S 450mAh LiPo, 13x8 folding prop|
|Hacker B20-18L geared 4:1||2S 600mAh LiPo, 12x7 folding prop|
|Hacker B20-18L geared 4:1||3S 450mAh LiPo, 10x5 folding prop|
|Axi 2208/26 V2 Long||2S 600mAh LiPo, 8x4 folding prop|
|Axi 2208/34 V2 Long||3S 500mAh LiPo, 9x6 folding prop|
Review by: John Armstrong
I have spent 2/3 months slowly putting this kit together. Quality was excellent with all parts fitting perfectly. End result gives me immense satisfaction. I have had to wait a few weeks for suitable weather but the Fresh flies beautifully with long gentle glides just as I had hoped. I have also had a couple of bad landings that left not a mark on her. Fills me with confidence just how strong the construction is. Will certainly be buying from Hyperflight again .
Review by: CJ ScottGreat kit
This kit build easily and precisely, and it flies the same. I have already ordered a second Fresh 2M to build it with electric power. I don't use the term "precisely" lightly... when I built the two outer wing sections, the dihedral was accurate to 1/100th of a degree left vs right. The flight characteristics are excellent. I set my CG at 68-69mm from the leading edge. I only needed to add a small amount of weight to get balance and the Fresh weighed in at 442.9 grams ready to fly. This is my favorite RES glider!
Review by: Rory HTop Quality
Neil's service is exceptional. Dispatched on the order day and arrived on the following. the kit is really well designed and there is sufficient help online to support a novice builder like me. still putting it together but I can already feel the temptation to speed up and get out. fighting that....
Review by: Kenneth HowellFresh F3-RES
Very good quality kit, with full size plan and no manual, however, online help is available. Previous building experience is required (in my opinion) as some of the parts need careful handling. I put mine together in 10 days. As usual, the service from Hyperflight was excellent!.
Review by: MalcjFresh
Very good quality kit, easy to follow plan, excellent service from Neil and the team.
Review by: Michael DFresh
The fresh is a straight forward build, the CnC cutting accurate, the plans a little over size. A very well natured plane in light winds , gets thrown around with a bit of wind.... I'm still playing with c.o.g. And have yet to see how it flies with a bit of extra weight on board.
Mine is flying at 510g motor(+spinner 32g) & 550mAh 3s, used Neil's cf & unstretched etched tubing instead of the supplied spring pull.
I put it together with SuperPhatic glue probably alot more than was needed in hindsight (never used it before, would definitely use it again) . Neil's service is fantastic and fast , unfortunately my kit had a few bits missing...... And Germany was too slow coming up with the parts for my liking...
I'm looking forward to getting to know this plane more, and am interested to see if it can knock my Callistic off its favourite in light's winds perch.
Review by: Russell DeakinTest flown at last
Finally calm weather, daylight and time off work co-incided to allow a test flight. The Fresh is a superb model. Very smooth, ultra efficient, responsive well balanced controls and flies very neutral. The model also looks much nicer in the air than in photos. 30 mins flying from a 3S 370 lipo today with no thermal activity.
Build is very rewarding, nothing difficult, but care and a little thought is required in some stages. Best advice is to buy the recommended motor. I shoe horned a larger diameter motor in and it was hard work. The ADH motor would have been a much better choice. AUW on mine is 515 grams. A smaller lipo and a few tweaks could easily see it under 500 grams... Highly recommended model, for those with some building experience.
Review by: RussellQuick Delivery
Placed order 14.00pm and kit arrived 12.15 the following day! Very nice quality kit and looking forward to building something for a change. Thanks Neil.
Review by: L. JonesHyperflght delight
Hyperflight is THE source for US flyers to obtain these wonderful European F3-RES kits. Fast, trusted shipping makes it all work for this customer. Thanks.
Review by: AnonymousF3 RES Fresh
Excellent kit, every part fitted perfectly. An English version of the instructions is available on line. It takes some time to read them and figure out the various building steps. I user 2 other web sites which provided a building log for the Fresh. They are as follows (you can use Chrome/google translation on the first site) :
This was a great build and this is the best flying glider I have ever built!
Review by: B GaiFRESH
I was one of the lucky one to get this kit!
by chance I was looking at build threads for the x res
on saw, IN STOCK on the fresh ,and pulled the trigger
another wonderful kit from Hyperflight, less then a week
and it came, every thing was in order, I loved working with a full sized plan , clean balsa ,all needed hardware, the spring loaded rudder and elevator was
alittle strange to me, but turned out easy to install and
works fine, weight came out to 445gms.,geat service
thank you hyperflight
Review by: Anonymous
Received package from hyperflight in less than 5 days. Great service