Prices shown exclude VAT 

Feather Cover

FEATHER-COV
Product Code: FEATHER-COV
 (2 reviews)

Price: $5.64

More than 10 in stock
Add to basket to see shipping cost
Quantity

Description

Feather Cover is a lightweight iron-on covering material weighing just 20 g/m2. It is ideal for lightweight and small models. What makes this material especially suitable for lightweight structures is its moderate shrink compared to traditional iron on coverings. This makes it easier to cover delicate built-up structures whilst minimizing the chance of inducing warps.

The translucent white colour gives the appearance of doped tissue with an attractive satin finish that can easily be decorated with self adhesive trim or paint. The rear of the film has a heat-activated glue coating, allowing it to be applied with a modeling iron set to to 120°C for tacking the sheet in place, and 160°C for shrinking.

  • Ultra lightweight
  • Low Shrink
  • Self Adhesive
  • Iron on

Feather Cover Film Specifications
Colour Translucent white
Length 4 m 13' 1"
Width 44 cm 17.3"
Weight 20 g/m2 0.07 oz/ft2
Tacking temperature 120 °C
Sealing temperature 140 °C
Shrinking temperature 160 °C
Packaging Supplied in a fattened roll

Reviews 2  


 Review by:

Feather cover instructions

This is an addition to my first review. Don't panic Neil nothing negative...
Your Feathercover is accompanied by a note of temps for tack, sealing and shrinking.. (thanks Neil). Burn it.! Or at least disregard the temperature aspect the iron you use is king establish your own glue/tack, seal and shrink temperature with just a very small square or so, a set of temperature s for the iron in use can be found. Also allow iron to cycle a time or two
First heat it tends to run high...
I have tried three irons,all work well, all claim different temps doing the same job. Instructions say just a guide. It should read irons are a law unto themselves.
Feathercover is great and strong. Just don't believe your iron,its out to get you. 😁


 Review by:

Covering with feather cover

Feather cover, well it certainly lives up to its name, because of this it is a little tricky to work with at first. It is very light but after a trial or three (in the main to establish correct settings on the iron.irvine iron the dial is imprecise and worth setting up the thing before covering in anger.) covering has a good tack and shrinkage is adequate. Overall feathercover is good and on the model much stronger than I at first thought.Final finish is good and I had no trouble in getting wrinkles out and a tight faultless cover... And colouring with permanent marker for a stripe or two works well. Overall I am very happy with it and would recommend. colours next please feathsrcover.


Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form