Prices shown exclude VAT 

Enigma F5J 4m

Product Code: ENIGMA
 (5 reviews)

Price: $1,321.88 save 6%

Out of stock, notify me when back in stock

Description

The Enigma F5J is a beautiful 3.95m F5J glider from Russia. A well engineered and attractive F5J competition model with an excellent flying reputation. The finish is not quite as good as that of the top manufacturers but the performance is first class.

The Enigma major innovation is a very nicely engineered V tail designed for tail mounted KST X08 servos. The elimination of tail pushrods combined with the supplied lightweight tail wiring harness means this configuration does not need substantial extra nose weight, but the RC installation is considerably simplified and the whole of fuselage front is available for the powertrain and ballast.

The fuselage 99% completed with the firewall fitted and just the tailboom to be fixed to the forward part. A substantial ballast tube 55 cm long with an internal diameter of 16 mm is ready fitted. The fuselage is a nice simple design with ample space for the powertrain, receiver, and ballast.

The wing is has XPS foam cores with chequerboard spread carbon skins. The wing spars are improved and are substantial. The wing colour schemes are stylish modern faded designs usually with contrasting white underside stripes. A well made and very lightweight wiring harness built into the wing, with the plug already mounted.

The accessory pack includes wing control horns, clevises and pushrods. And wing and tail servo wiring harnesses as previously stated. The plane is sometimes/was previously called the Skiff and some links give that name. See this very helpful RCGroups Enigma build thead.


Enigma Specifications
Wing span 4.0 m 156 in
Wing area 80.0 dm2 1240 sq in
Length inc spinner 176 cm 69.1 in
Flying weight from 1475 g 52.0 oz
Wing loading 18.4 g/dm 6.0 oz/sq ft
Aspect ratio 19.5
Wing airfoil Proprietary
EDA (dihedral) 6.2
Spinner Diameter 32 mm
Centre of Gravity 105 - 115 mm from wing leading edge
Controls V tail, ailerons, flap, throttle


Enigma Typical Weights
Fuselage 235 g 8.3 oz
Wing centre panel(RHC) 440 g 15.5 oz
Wing tips 460 g 16.2 oz
V tails 55 g 1.9 oz
Accessories 10 g 0.4 oz
Total structure 1200 g 42.3 oz
Receiver 8 g 0.3 oz
Tail servos 16 g 0.6 oz
Aileron servos 20 g 0.7 oz
Flap servos 26 g 0.9 oz
Speed control 25 g 0.9 oz
Motor 80 g 2.8 oz
Prop & spinner 20 g 0.7 oz
Battery 80 g 2.8 oz
Flying weight 1475 g 52.0 oz


Recommended Servos
V Tail KST X08N, Blue Bird BMS-A10S
Aileron KST X10 Mini, KST X10, MKS DS6100, MKS HV6100, MKS HV6130, Blue Bird BMS-115HV, Blue Bird BMS-125WV, Blue Bird BMS-M15V
Flap KST X10 Mini, KST X10, MKS DS6100, MKS HV6100, MKS HV6130, Blue Bird BMS-115HV, Blue Bird BMS-125WV, Blue Bird BMS-M15V


EnigmaF5J Powertrain Recommendations
Powerline Micro 1015 3S 1Ah LiPo, 16x8 prop (10 m/s, 2000 fpm, 43A)
Powerline Micro 1020 3S 1Ah LiPo, 16x8 prop (11 m/s, 2000 fpm, 44A)
Powerline Micro 1025 3S 1Ah LiPo, 16x8 prop (10 m/s, 2000 fpm, 43A)
Leomotion L3013-4550 3S 1Ah LiPo, 15x9 prop (11 m/s, 2200 fpm, 57A)

Reviews 5  


 Review by:

Enigma F5J 4m

Nice ship!!!!....Everything fits well and I like the pre-wired and fitted wing and elevator connectors...and the service from Neil basically outshines everybody else!!!


 Review by:

What an Enigma!

Well I just had to have another one, just received my second Enigma from Neil.
The finish quality and fit are just superb and cannot be faulted at any level.
It is a joy to put together the second time and the lessons learnt with No 1 helped immensely. I do wish that the firewall was not drilled at all, rather than the four bolt holes, better just to have the central hole so that three bolt fixing for reisenhaur gear box can be achieved with good spacing.
I have now had some 8 outings with the No1 model, and it is an absolute joy and revelation to fly, indicates lift brilliantly, it is also much easier to repair being of solid cored construction. I have unfortunately had several radio failures with it, which has now been traced to faulty lipo’s no reflection on the plane but is beginning to look like the most battle scarred glider I have ever had, not bad as it’s only a few months old, it does break, but I have found it is well easier to repair than hollow moulded construction. It does not look pretty now but still flies beautifully.
Certainly the model of choice if we ever get back to comp flying in 2021.


 Review by:

F5J “Enigma” or aka “Skiff” by any other name

I have to say as I start to pen this review for Neil at Hyperflight, it is not something that I do very often at all, however, I am about to make an exception.
I have had a little experience previously with this glider from a fellow F5J flyer who bought the “Skiff” a couple of years back, and had the wings fold on the maiden flight. Credit to Neil, the wings were re placed and I understand that the wings now include a shear web between the spars rather than just the core Rohacell. That said, the plane looked good, and I do like “V” tails - when it was repaired it flew well.
I had a clear out of the hangar, during this Covid calamity, and was rather disinterested in competition flying, but having cleared the hanger, the bank balance had funds present and I had some servos and a motor in a draw.
I was initially drawn to the price for this plane and then realised that I was looking at the site as if I was based in the USA so the price was ex VAT! Still not bad with adding on HMRC’s cut.
The order was placed and duly arrived next day. Well packed and undamaged. There have been some comments concerning the quality of the finish, my experience was very much better, and on a close look the engineering and finish was excellent and certainly compares to many other of the Eastern European offerings. In fact the quality and fit I would say are excellent, with some very nice touches, including beautiful machined fit of “V” tail to Fuz, ready fitted wiring harness extremely light wires used, canopy fully fitted, even wing servo hatches cut to fit, and ready made up push rods and epoxy cnc cut aileron and flap horns.
Target AUW weight was stated to be around 1475g, mine finished at 1550g but I had 120g 4s lipo and a 105 g motor and gearbox fitted, and it was however the 4m version.
Two points of note:- the built in fuselage ballast tube is 550 mm long and starts from the rear of the canopy opening with roughly 200mm in front of recommended C of G position, and over 300mm behind. This although not yet tried is expected to produce a rearward shift in C of G which is not good. The Ballast tube is bent along its length to get under the wing seat rather than being straight, consequently the ballast slugs from my Pike Perfection would fit into the tube but would only go round the bends, if they were cut into 30mm long slugs. Second point is that the ready made push rods for aileron and flap connections are pre bent – why I cannot understand as they do not assist with servo installation and are now strait.
I purchased two KST X08’s lug less servos for the V tail - MKS 6100s will not fit as they need to be 8mm.
Ordinary KST’s XO8’s with mounting lugs would have fitted. C of G turned out at 110mm i.e. mid-point of recommended range
First test launches followed 2 weeks after delivery, Flight test conditions were not bad but not the best, plus 10 degree C temperature and no wind whatsoever. I tried a couple of hand launches and made some very minor trim adjustments to glide path, next hand throw went for about 200 metres at 1m off the ground, I had to nose it into terra firma before it hit a fence! This was a seriously flat glide.
First couple of powered launches then followed to approx. 100m and an 8 and a 10 minute flight resulted. No height gains were achieved but the sink rate was so absolutely minimal, turns appeared to lose no height at all, handling was crisp and tidy. Landing set up on flaps and the compensation on elevator proved to be totally excessive so landed without flaps and was wondering when plane was actually going to set itself down.
There is only a minimal pitch up trim change from deployment of full flaps.
Overall, I am so impressed with the quality of this glider and its flight characteristics I am looking forward must recommend this plane to one and all.
Addendum the Second day of flight testing now completed, made fatal error and had that “one last launch”, resulted in flat battery and an encounter from 30m altitude, then no control and 70mm into soft terra firma. Resulted in fuz being broken in two places, both wing joiners broken and some creasing to main wings in several places, I was not best pleased but now repaired and waiting for some replacement wing joiners - note to self - change the lipo before having that “last flight” .
Looking forward to getting it back into the air – what a plane highly recommended, it’s a gem at a good price. May well be tempted to another.


 Review by:

Hidden Gem

This model has to be the hidden gem of the F5J world. Fantastic looking V tailed glider at an amazing price. First class fuselage, cw ballast tube and wiring harness already made and fitted. The wings are well built without all the bells and whistles of the show ponies. Assembly and flight review to follow.
Good prompt service once again from Hyperflight. Really well packed, survived the trip to Australia intact.


 Review by:

Finition mediocre. Dommage. Le planeur vole très bien

Translation: Mediocre finish. Shame. The plane flies very well.

HyperFlight comment: Agreed, the finish could be improved. But the performance is excellent and the price is reasonable. Alain was sent detailed photos showing the finish problems beforehand, and asked if he wanted to proceed.


Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form