Prices shown exclude VAT 

Circle Dancer 2000 RES kit

Product Code: CD2000
 (1 review)

Price: $142.70

2 in stock
Add to basket to see shipping cost
Quantity

Description

The Circle Dancer 2000 RES is a great build it yourself 2m F3-RES kit model with an excellent pedigree. The model is supplied as a kit of CNC cut balsa, ply and carbon parts. The nicely drawn large full size plan includes English translations of all text. A brief photo-illustrated manual is avalable, but as the text is in Czech only the kit is more suitable for seasoned builders. Click on the following links to download the various manual sections: Wing assembly, Fuselage assembly, Tail assembly, Electric installation

The fuselage consists of a wooden pod with a large access hatch ready-fitted with securing magnets. At the font the beautifully carved nose block is hollow to take lead shot nose weight. Inside the pod a plywood tray has been installed for screwing the rudder and elevator servos too. The servos can be up to 24 mm long by 12 mm wide. The pod includes nuts to take the wing mounting screw and fittings to take the supplied adjustable tow hook. The carbon tailboom cleverly slides into the read of the pod and locates into a rear bulkhead, and a beautifully implemented carbon fairing streamlines it to the rear of the pod. A pylon for mounting the tailplane is molded into the rear of the tailboom, together with flats for the fin to be glued to. The tailboom also has been fitted with low friction plastic pushrod outer tubes and wire pushrods.

Although the fuselage is mainly intended for pure glider use the pod is quite large and it can easily be built as an electric glider, with a 30 mm or 32 mm spinner.

The all balsa fin includes a large rudder for good directional control. The tailplane is similarly constructed and both are attractively shaped, giving the model a charming look.

The wing centre panel incorporates a substantial spruce spar and top surface forward sheeting to minimise drag. The centre panel incorporates a large spoiler for accurate landing and safely exiting strong thermals. The spoiler servo can be up to 10 mm thick. The ends of the centre panel have magnets built in to keep the tip panels in place. The tip panels are more lightly built and use front riblets to help maintain the correct forward airfloil shape. The tip panels are attached to the centre panel with a beautifully molded carbon dihedral brace.

The accessory pack includes the adjustable tow hook, control surface horns and other small fittings. The spoiler is designed to be actuated by a long spoiler servo output arm. The tail surfaces are intended to be connected directly to the wire pushrods with L bends. No clevises are supplied or needed in our opinion, but a keeper will be required to ensure the L bends don't become detached.

CD2000 RES Specifications
Wing span 2.0 m 78 in
Wing area 35.1 dm2 545 sq in
Length 124 cm 48.8 in
Flying weight from 475 g 16.8 oz
Wing loading 13.5 g/dm 4.4 oz/sq ft
Aspect ratio 11.3
Wing airfoil AG35/36/37
Dihedral (EDA) 11.3º
Centre of Gravity 78-82 mm from wing leading edge
Controls Rudder, elevator, spoiler


CD2000 RES Typical Weights
Pod 65 g 2.3 oz
Boom and pushrods 35 g 1.2 oz
Centre panel 106 g 3.7 oz
Wing tips 112 g 4.0 oz
Tailplane 13 g 0.5 oz
Fin+Rudder 11 g 0.4 oz
Accessories 20 g 0.7 oz
Total structure 362 g 12.8 oz
Receiver 6 g 0.2 oz
Rudder & elevator servos 10 g 0.4 oz
Spoiler servo 5 g 0.2 oz
Battery 60 g 2.1 oz
Noseweight 32 g 1.1 oz
Flying weight 475 g 16.8 oz


Circle Dancer 2000 Recommended RC
Rudder & elevator servos Ripmax SD100, Blue Bird BMS-101AMG, Blue Bird BMS-101DMG, Blue Bird BMS-101HV, Blue Bird BMS-126WV, KST X08, Ripmax SD150, Corona DS843MG, Graupner DES 261, EMAX ES08A
Spoiler servo Blue Bird BMS-101AMG, Blue Bird BMS-101DMG, Blue Bird BMS-126WV, KST X08, Ripmax SD150, Corona DS843MG,
Receiver 4 or more channel receiver to match your transmitter


CD2000 Control Throws
Rudder 60 mm each way
Elevator 10 mm up / 5 mm down
Spoiler 40 mm up (75°)
Tow hook 9 mm forward of CG

Reviews 1  


 Review by:

Can't fault Hyperflight's customer service, kit received within 48 hours of ordering, also I had a few questions regarding the instructions which are in Czech and again I had an answer within 48 hours not only from Hyperflight but also the manufacturers.
Now to the kit, the components are very good quality, I was very pleased when opening the package.
The fuselage goes together nicely, its a jigsaw in balsa and ply that doesn't need a jig for assembly.
The carbon tail boom is really good too.
The wings will take up most of the assembly time, the main spar alone comprises 21 parts but I'm sure there must be a weight related reason for this.
So, if you have some previous experience of balsa construction then you will probably be very pleased with the kit. Personally, this is my first kit build for 40 years so the wings are a bit of a challenge and I might have been better choosing something a little less complicated and not so lightly built but I will persevere and hopefully it will go together OK despite my lack of recent building experience.


Related Categories

Related Products 0

Shop Securely

Follow Us

facebook   twitter   Google My Business

Contact Us

HyperFlight
Drybank Farm
Fosse Way, Ettington
Stratford-upon-Avon
Warwickshire, CV37 7PD
United Kingdom
+44 (0) 1789 336166
sales@hyperflight.co.uk
Contact Form