|10.0 mm tapering to 5.0 mm Carbon Fiber Boom Specification|
|Wide end outside diameter||10.0 mm|
|Narrow end outside diameter||5.0 mm|
|Wall thickness||0.3 mm|
|Uses||F3-RES and other wing spars, tailbooms|
|Structural material||HM carbon fibers|
|Carbon content||Approx. 58%|
|Packing type||Rigid-usually sent in a postal tube|
Review by: Peter Richard Kirby
Used this boom to strengthen the rear fuselage on a Mercury Grebe glider that I converted from free flight to RC. Worked very well.
Review by: Anonymous
Boom appears to be well made. Quite stiff. Very light. I will use it in a semi-hombrew F3RES plane based on the Allegro-Lite wing.