HyperFlight BLHeli32 30A ESC with SBEC Specification | |
---|---|
Continuous Current | 30A |
Peak Current | 33A for 10 seconds |
Battery | 2S - 3S LiPo |
SBEC | 5.3V @ 2A |
Weight inc leads and XT30 plug | 7.5g |
Weight ex leads | 4.5g |
Firmware | BLHeli_32 |
Programmable | Yes, with Arduino |
PCB Size | 33mm * 14mm |
Battery connector | 4 cm wires, XT30 plug/socket fitted |
Motor connector | lands on PCB |
RC wire length | 15 cm |
Review by: Hutton Oddy
Great little ESC. Suits OzeRes and LARC 1806 perfectly.
,,and as usual Neil's service and delivery is superb.
Review by: Loet Wakkerman
HyperFlight 30A BLHELI-32 with SBEC & XT30 Plug.Very happy with this controller for my T30 motor in my ERES Purito. I first used the Pulsar 15A but that was pretty unreliable.
Cheers.
Review by: Garry Whitfield
HyperFlight 30A BLHELI-32 with SBEC & XT30 PlugThis is a great little unit and finally (through no fault of HyperFlight) I have received my second HyperFlight 30A BLHELI-32 with SBEC & XT30 Plug. The freight time was a little longer than usual but I put that down to the COVID situation. Well done Neil and Staff.
Review by: Herman
25A BLHELILove this one,use it in my FIREBLADE from GCM !
Very speedy service from Neil,within 3 days in Holland 👍
Review by: Mike A
Super light speed controller/ESC.This is a perfect speed controller for lightweight gliders of around 1.5 span. It is small and extremely light, approximately just 8 grams not including connecting wires. Neil has also programmed this ESC for gliders with the brake switched on. I have been using it in my Blaster and it performs perfectly and remain cool even after a sustained motor run. Just Excellent.