|HyperFlight BLHeli32 30A ESC with SBEC Specification|
|Peak Current||33A for 10 seconds|
|Battery||2S - 3S LiPo|
|SBEC||5.3V @ 2A|
|Weight inc leads and XT30 plug||7.5g|
|Weight ex leads||4.5g|
|Programmable||Yes, with Arduino|
|PCB Size||33mm * 14mm|
|Battery connector||4 cm wires, XT30 plug/socket fitted|
|Motor connector||lands on PCB|
|RC wire length||15 cm|
Review by: Loet WakkermanHyperFlight 30A BLHELI-32 with SBEC & XT30 Plug.
Very happy with this controller for my T30 motor in my ERES Purito. I first used the Pulsar 15A but that was pretty unreliable.
Review by: Garry WhitfieldHyperFlight 30A BLHELI-32 with SBEC & XT30 Plug
This is a great little unit and finally (through no fault of HyperFlight) I have received my second HyperFlight 30A BLHELI-32 with SBEC & XT30 Plug. The freight time was a little longer than usual but I put that down to the COVID situation. Well done Neil and Staff.
Review by: Herman25A BLHELI
Love this one,use it in my FIREBLADE from GCM !
Very speedy service from Neil,within 3 days in Holland 👍
Review by: Mike ASuper light speed controller/ESC.
This is a perfect speed controller for lightweight gliders of around 1.5 span. It is small and extremely light, approximately just 8 grams not including connecting wires. Neil has also programmed this ESC for gliders with the brake switched on. I have been using it in my Blaster and it performs perfectly and remain cool even after a sustained motor run. Just Excellent.