| Big Vick 1m DLG Specifications | ||
|---|---|---|
| Wing span | 1.0 m | 39 in |
| Wing area | 14.0 dm2 | 217 sq in |
| Length | 75 cm | 29.5 in |
| Flying weight from | 115 g | 4.1 oz |
| Wing loading | 8.2 g/dm | 2.7 oz/sq ft |
| Aspect ratio | 7.1 | |
| Wing airfoil | MH32 | |
| Dihedral angle | 10.0º | |
| Centre of Gravity | 60-65 mm from wing leading edge | |
| Controls | Rudder, elevator | |
| Big Vick 1m DLG Typical Weights | ||
|---|---|---|
| Fuselage | 25 g | 0.9 oz |
| Wing | 48 g | 1.7 oz |
| Fin | 6 g | 0.2 oz |
| Tailplane | 6 g | 0.2 oz |
| Total structure | 85 g | 3.0 oz |
| Receiver | 5 g | 0.2 oz |
| Rudder servo | 5 g | 0.2 oz |
| Elevator servo | 5 g | 0.2 oz |
| Battery | 10 g | 0.4 oz |
| Noseweight | 6 g | 0.2 oz |
| Flying weight | 115 g | 4.1 oz |
| Recommended R/C-nano gear only | |
|---|---|
| Elevator & rudder servos | Ripmax SD100, Blue Bird BMS-101AMG, Blue Bird BMS-101DMG, Blue Bird BMS-101HV, Gening D531BB, Gening D541BB |
| Receiver | Orange compatible, Lemom compatible, Jeti Duplex R4 & R5, Multiplex Mlink RX-6-DR Light*, FrSky D4R II |
| Battery | Radient 1S 500 mAh, HyperLipo 2S 175 mAh, 150 mAh 4.8V, HyperFlight 300 mAh, Dream-Flight 300 mAh |
Review by: Sture, from sweden.
Big Vick BuildJust finished the build. Maiden flight remains. Definetely not for beginners, but I'm not.( I am 70 now, built models since 10)
You learn a lot about different glue types, and about tape covering.
I have a very small 4ch receiver, two 4,3 g servos, a 5V boost converter (saved from a powerbank). With a 750mAh 1S (AA cell) total weight is 127 g and CG is about right.
Looking forward to the maiden, Fun to build, tricky to install pull-string control though. Recommend the kit. Good starting model to learn DLG before you take next step in the hobby.
Review by: Peter
Good entry level planeNice plane. Easy and fun to build. Instructions could be better but there is a lot to find on the web.
I highly recoomend this plane.
Review by: Sean Simms
Quality, Fun and a bargain!Perfect for me to try DLG, the quality of the wire cut parts is great. Fast assembly and surprising flying capabilities. Will probably buy another before investing in an Elf.
