|Wing span||1.20 m||47 in|
|Wing area||17.1 dm2||265 sq in|
|Length||62 cm||24 in|
|Flying weight from||250 g||8.8 oz|
|Wing loading||15 g/dm2||4.8 oz/sq ft|
|Wing airfoil||6% proprietary|
|Centre of Gravity||29.5-30.5 mm from wing leading edge|
|Recommended R/C-nano gear only|
|Rudder servo||KST X06|
|Aileron servos||KST X08H|
|Receiver||Small 4 chanel rx to suit your tx|
|Battery (60x18x8mm)||1S 380-660mAh LiPo, Ytong 1S 380 mAh, FullyMax LiPo 1S 660mAh, Tatu 1S 600 mAh|
|Alien Typical Weights|
|Wing||109 g||3.8 oz|
|Fuselage||27 g||1.0 oz|
|Fin||5 g||0.2 oz|
|Nosecone||6 g||0.2 oz|
|Accessories||15 g||0.5 oz|
|Total structure||162 g||5.7 oz|
|Receiver||6 g||0.2 oz|
|Elevon servos||16 g||0.6 oz|
|Rudder servo||6 g||0.2 oz|
|Battery||20 g||0.7 oz|
|Nose weight||40 g||1.4 oz|
|Flying weight||250 g||8.8 oz|
Review by: Götz Michael BeckersAlien crossing the channel
...absolute perfect and superfast service by Neil !!!
I'd never thought a purchase in GB..and shipping to the EU could be that easy..
Review by: Rory from EdinburghAlien sloper
this is my first carbon build and its very simple. the instructions are clear and the 3D printed parts fit perfectly. It's a well thought out machine and I drilled a bore in a copper cylinder to fit in the ballast tube for 30g and 50g slugs. As a left handed flyer, the fin hinge is on the left hand side so that's something to be aware of if you're wanting it for a left hand launch dlg. as usual impeccable service from Neil.
Review by: Andy WhiteheadLooks Stunning
As a kit designer and manufacturer I was really excited to see the Alien appear on Hyperflight, and it was a must have toy. Its not often I take the plunge on a model I didn't design myself and really happy I did. Whilst the build hasnt started yet due to other commitments the quality of the components and the fit and finish is exceptional and more that meets my own expectations. I fully intend to do a mini review of the model when I start construction and will share my findings with Neil.