VAT excluded

1S LiPo battery to 5V 1.5A step up Convertor

Description

1S LiPo battery to 5V 1.5A step up convertor module.Wide input voltage range from DC 1V to 5V This RT9266 DC-DC Step Up Boost Converter Module supports input voltages from DC 1V to 5V, making it ideal for powering RC from low-voltage sources like single-cell lithium batteries.
Output voltage fixed at 5V with high efficiency The module boosts input to a stable 5V output, ensuring reliable power delivery for USB devices and microcontrollers, even when input voltage fluctuates.
High current output up to 1.5A With a maximum output current of 1.5A, this boost converter can supply sufficient power for 2 servos in small models
High dissipation power of 5W for stable operation Designed with a 5W dissipation power rating, the module maintains performance under load and ensures long-term reliability during continuous use.
Wide operating temperature range: -40 deg C to +85 deg C.The circuit design does not require electrolytic capacitors and tantalum capacitors (the life of electrolytic capacitors is short, and tantalum capacitors may explode). Three ceramic capacitors currently used in high-end circuits are used.The ripple is very low, only tens of millivolts, and many of the ripples in the industry have reached 500 millivolts, which will cause an invisible damage to the equipment, and severely cause the equipment to work abnormally or damage.The same load indicator light and undervoltage indicator (when the battery voltage is less than 2.7V, the indicator light will go out under load, when the battery voltage is greater than 2.7V, the indicator light will be on when the battery voltage is greater than 2.7V, and the indicator light will be slightly bright)Small size, 14.1*18.8*5.5mmThe circuit conversion efficiency is high. When the efficiency is high, it exceeds 90%. The efficiency of a single-cell lithium battery is also greater than 80%. Unlike some of the counterparts, the efficiency is only 60-70%.Input low power reverse connection protection, if your battery has a 2A protection board, the protection board will protect when the positive and negative poles of the input power supply are reversed. Note that when there is no protection board or the input current is greater than 2A, the input reverse connection protection It will fail and cause damage to the module, remember.Low quiescent current, the new version, the quiescent current will be less than 100 microamps. No switch is needed to connect to the battery.Module Specification
Module nature: non-isolated boost module (BOOST)
Input voltage: 1-5V
Output voltage: 5.1-5.2V
Output current: rated 1.5A (single cell lithium battery input), 1.5A (single cell lithium battery input)
Conversion efficiency: up to 96% (the higher the input voltage, the higher the efficiency)
Switching frequency: 500KHz
Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
Undervoltage indication: the LED indicator light with load is on (the input voltage is lower than 2.7V and the LED indicator light is off)
Full load temperature rise: 30 deg C
Quiescent current: 130uA
Load regulation rate: ±1%
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short-circuit protection: None. If short-circuit protection is required, a lithium battery protection board can be added, or a lithium battery with protection can be used.
Input reverse connection protection: None, if you need reverse connection protection, please equip our reverse connection protection board.Connection method: soldering
Input mode: IN+ input positive, IN- input negative

Reviews 0  

We're pleased you would like to review 1S LiPo battery to 5V 1.5A step up Convertor.

Please fill in the details below and press the submit button.

Your review will appear here immediately.

Leave blank to remain anonymous
For security this will not be shown
Submit review


Product Code: HF1S25V
 (add a review)
$6.59
More than 30 in stock
Add to basket to see shipping cost
Quantity