Emax ES9251 II Submicro Servo - 0.9Kg.cm 0.08s 3.8g 8mm
Description
The Emax ES9251 II Submicro Servo is a good ultralight servo that is ideal for small models weighting up to 400g. It weighs only 3.8g (see photo) yet has a reasonable 0.9Kg.cm of torque. Unlike most servos in this weight category it has an acceptable dead band, without too much slop in the geartrain.Despite the minimum specified voltage of 4.0V this servo is often used successfully on a 1S LiPo.
| Emax ES9251 II Submicro Servo Specifications | ||
|---|---|---|
| Body dimensions | 18.5 mm wide x 8.3 mm thick x 15.3 mm high | 0.73" wide x 0.33" thick x 0.60" high |
| Max dimensions | 25.4 mm wide x 8.3 mm thick x 21.0 mm high | 1.00" wide x 0.33" thick x 0.83" high |
| Stall torque (4V) | 0.66 Kg.cm | 9 oz.in |
| Stall torque (4.8V) | 0.8 Kg.cm | 11 oz.in |
| Stall torque (5.5V) | 0.92 Kg.cm | 13 oz.in |
| Weight | 3.8 g | 0.13 oz |
| Lead length | 18 cm | 7.1 in |
| Operating speed (4V) | 0.11 sec/60° | |
| Operating speed (4.8V) | 0.09 sec/60° | |
| Operating speed (5.5V) | 0.08 sec/60° | |
| Operating voltage | 4V to 5.5V | |
| Operating temperature | °C | |
| Bearings | Plain | |
| Gear material | Nylon | |
| Case material | Nylon | |
| Motor type | Corless | |
| Working frequency | Hz | |
| Dead band/resolution | µs | |
| Pulse width for ± 60º | µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Potentiometer | |
| Supplied accessories | 4 servo output arms, 2 arm retaining screw, 3 mounting screws | |
| Optional accessories | ||
Reviews 4
Happy Customer
United Kingdom
Original servos not in stock so agreed replacements could be sent. New servos are excellent and do the job perfectly. The only issue I had was the refund for the price difference took a while to sort out. Other than that I'm very happy
ST
United Kingdom
Email servos
Bought for an indoor scale model, do the job just fine, top service from Hyperflight.
