| 1.0 mm Carbon Fiber Strip Specification | |
|---|---|
| Thickness | 1.0 mm |
| Width | 3.0 mm |
| Weight per m | 4.5 g per meter |
| Length | See the options below the price |
| Structural material | T300 carbon fibers |
| Matrix | Epoxy resin |
| Carbon content | Approx. 60% |
| Youngs Modulus | 230 GPa |
| Ultimate tensile strength | 1600-2300 mPa |
| Fibre density | 1.4 - 1.8 g/cm3 |
| Resin glass transition Tg | 170º C |
| Packing type | Bendy-sent coiled in a pizza box if not ordered with something rigid |
Review by: Graham Legg
Carbon strip 3 & 5 mm.As described and usual fast service from Hyperflight. Used before and will again. Thanks
Review by: Graham Legg
Carbon strip 3 & 5 mm.As described and usual fast service from Hyperflight. Used before and will again. Thanks
Review by: Laurent Lasne
3mm x 1mm Carbon StripGood quality carbon strip, very good packaging, and fast delivery. I will recommend this shop. Thank you
Review by: Manuel Joao Teixeira
GoodGood service
Review by: Anonymous
3mm x 1mm carbon strip sent with order of 6mm strip.Good packaging & delivery
Review by: John Smith
In my dealings with Hyperflight I have all ways found their products to be of very good quality backed up by swift delivery and service.
Review by: tiggyfox
1mm x 3mm carbon stripThis product is ideal for stiffening flying wings simply cut a 3mm deph
Channel using a craft knife push the carbon in then glue using thin cyano , if you fit both sides it makes it really rigid .
Review by: MartinR
Great for strengthening wings and fuselage on large 3D EPP foamy bipe. Gives more rigidity than using round carbon for very little extra weight.
Great service too!
Review by: HeliHaven
Very good indeedAccurate sized strips. Very strong and very stiff when used along the sides of my foamy Sea Vixen tail booms. Ideal!
Review by: andrew
carbon rstripexcellent stuff