UHU Hart Model Glue

UHU Hart (Uhu Hard in English) is ideal for gluing small parts in model building, handicraft and for general use at home. Particularly suitable for balsa wood, wooden materials, depron and other foam plastics. Sets as a hard film suitable to reinforce weak areas. Suitable for balsa wood, wood based materials and many types of plastic. For all types of model building.

UHU Hart key features:

• Ideal for depron and other foam plastics.
• Good for balsa and other woods.
• All purpose glue for use on most materials.
• Crystal clear - does not leave a stain or colour the glued parts.
• Does not melt foam plastic.
• Sets in a few minutes.
• 35g tube.

Directions for use
The surface must be dry, clean and free of dust and grease. Apply a thin layer to one side. Immediately place the parts together and hold in place. For hard, enclosed surfaces apply a thin layer to both sides, let the adhesive dry, then re-apply to one side, place the parts together and hold in place.

Safety
The adhesive contains volatile, highly flammable solvents. Suitably safety measures should be take regarding usage and storage. When gluing ensure adequate ventilation.

Stains/residue
Smeared adhesive should be wiped off as soon as possible. Dried residues and spots on the clothing can be removed with the UHU dissolver or with acetone.

Storage conditions
Store in tightly closed packaging in a dry, cool and frost-free place.

JP ID: UHU4093