The
HyperFlight 40A BLHELI-32 SBEC ESC is a lightweight brushless speed control with a 6V 3A SBEC running the renowned BLHeli32 firmware. The ESC has been setup for glider operation with the brake on and has a XT60 connector ready fitted.
This ESC is unusual in being a modern lightweight efficient drone type ESC and having a 3A high voltage switching battery eliminator circuit (SBEC) fitted. This makes it ideal for all high performance aircraft where speed control weight and size need to be minimised.
Ready programmed with brake set. No programming required (or possible without an Arduino).
| HyperFlight BLHeli32 40A ESC with SBEC Specification |
|---|
| Continuous Current |
40A |
| Peak Current |
44A for 10 seconds |
| Battery |
2S - 4S LiPo |
| SBEC |
6V @ 3A |
| Weight inc leads and XT60 plug |
11.3g |
| Weight ex leads |
4.8g |
| Firmware |
BLHeli_32 |
| Programmable |
Yes, with Arduino |
| PCB Size |
33mm * 14mm |
| Battery connector |
6 cm wires, XT60 plug/socket fitted |
| Motor connector |
lands on PCB |
| RC wire length |
15 cm |
447821351341
sales@hyperflight.co.uk
Contact Form
