HyperFlight 28A BLHELI-32 ESC with 3A SBEC

Product Code: HF-BLHELI-28

(7 reviews)

Price: $29.43

Description

The highly regarded HyperFlight 28A BLHELI-32 ESC is a brushless speed control with a 5.3V 3A SBEC and a JST BEC connector. Lightweight and very compact, this ESC is perfect for F5K, electrified DLGs, F5L and F5-RES 2m models.

The three motor wires need to be soldered to the lands on the PCB. Swap any two wires if the motor rotates in the wrong direction.

Ready to go with brake on. Unless you want to change the setup (unlikely) this is a plug and play solution - no programming is required.

A JST BEC socket has been fitted as most small batteries use a JST BEC plug, however this plug may overheat when used at higher currents. For safety we recommend the JST BEC connector is replaced with a larger plug if currents over 20A will be employed.

December 2023 - this latest delivery has a more powerful 3A BEC circuit and a slightly longer battery connector wire, as requested by customers.

HyperFlight BLHeli32 28A ESC with 3A SBEC Specification
Continuous Current	28A
Peak Current	30A for 10 seconds
Battery	2S - 3S LiPo
SBEC	5.3V @ 3A
Weight inc leads and JST BEC plug	7.6g
Weight ex leads	4.5g
Firmware	BLHeli_32
Programmable	Yes, with Arduino
PCB Size	33mm * 14mm
Battery connector	7 cm wires, JST BEC socket fitted
Motor connector	Lands on PCB
RC wire length	15 cm

More details

BLHeli32 How to Program [218kb]

BLHeli32 manual Rev32.x [104kb]

BLHeli32_HyperFlight 19 October 2022 INI file [17kb]

Reviews 7

05/04/2024 09:46

Review by: Richard T

Great esc. Small and smooth in operation. I have two. Perfect set up for a RES and F5k models.

15/03/2024 10:10

Review by: Carl Shorter

Great, lightweight, ready to go ESC

Used a few of these now, and have been very good and ready setup to use with a glider. All I do is set the throttle limits via my transmitter on first use and it's ready.

17/01/2023 17:15

Review by: Nigel T

I ordered the 28A BLheli-32 ESC, DYS 19 Motor yesterday at 1pm yesterday (Monday)and it arrived in Northern Ireland at 11 am this morning(Tuesday), great service Neil and the Team

14/01/2023 19:28

Review by: Anonymous

Very good product

03/11/2022 11:54

Review by: David

So easy!

Couldn't believe how easy this unit is to use (even the soldering is a doddle) and it works without any transmitter messing about.
I didn't solder the motor leads directly to the unit but made up 3 short banana leads
to connect the motor

01/11/2022 11:24

Review by: Anthony Purnell

Nice little controller

Small, light, works nicely. Ideal for electric gliders.

27/10/2022 14:18

Review by: Larry

Works great after turning off Temp Protection in BL 32