0.71mm ID Etched PTFE (22 AWG Bondable PTFE) Pushrod Outer Tube

I purchased this tubing for DLG tails to insert into foam vac bagged stab & fin before fitting torsion springs to help avoid springs damaging foam and pushing thru light skin. Also use as friction free outer for stainless steel pushrods on non pull pull DLGs. Excellent product & Excellent service from Hyperflight, 8 days to Australia.

Got this tubing to insert in the tails of my 1 meter scratch build

perfect with beadalon 49 strand 0.015" cable for dlg

I glue this tubing into the tails and then slide in the torsion springs...keeps the springs from pushing and poking the carbon tails...works well

Super Produkt für meine R.E.S.- und E-R.E.S.-Flieger: leicht und leichtgängig. Über die Gewichtsersparnis und Tipps zum Einbau in FMT 6.2021 in meinem Bericht über die Eli. Sofort versendet. Die Zeit auf dem Versandweg hielt sich - trotz Brexit - in Grenzen (ca. 10 Tage).
Great product for my R.E.S.- and E-R.E.S.-flyers: light and smooth. About weight saving and tips for installation in the grat german magazine FMT 6.2021 in my report on the Eli. Immediately dispatched. Despite Brexit, the time on the shipping route remained limited (approx. 10 days).

Got this tubing to insert in the tails of my 1 meter Hawks....after a lot of flights, the torsion springs started pushing on the carbon skin...drilled some 1.05 meter holes, glued in the tubing, inserted springs, done deal!!!....Got the idea from my Auri build!!

A1 service and shipping, goods arrived well packaged in a sturdy cardboard container. High quality product, specifications as described. Recommendable.

Best DLG solution.

I read about this in RCM&E. I am installing ‘pull pull’ aileron controls into an SE5a (3ft span) and previous experience with fishing wire did not bode well. This tubing however is exactly what was needed to provide minimum resistance for 4 ailerons off a single micro servo. Tests are excellent, but a way to go yet before it’s proven in the air.

Best for pushrods in DLGs

Not used it yet but really nice low friction tubing, will be using mine to protect my pull spring cable from rubbing on carbon.

Great product plus quick and efficient service means I'll be coming back for more when I need it!

Great stuff; finally it's available on roll and not in precut length.I always have some of this in stock, just in case.Getting the wires through an F3k fuse is so easy with this. It took a bit time from order to arrival but that's when you order during christmas-time.

Had a bit of an issue trying to pay from the U.S., but Neil was more than quick to resolve and have my order shipped in an impressive amount of time. REAL Service!! Thanks.

Good solution for pushrod outer tube. Versatile options for installation either inside booms or outside. Prompt dispatch and great packaging. Thanks.

Fantastic solution when paired with .5mm carbon rod for smooth, slop free control run. Great dispatch and packaging from Neil.

I was disappointed that there wasn't but a 1 meter piece. I should have read the discription more closely. The picture was deceiving.

Outstanding product and prompt shipment, will DEFINITELY be ordering again.

Works well.

Running a tube and pushrod inside a 1/8" balsa 'T' tail structure - a neat solution made possible by this product. Thanks for your excellent service - the model's maiden was last weekend!

purchased this teflon tubing for my mini topsky,great product for dlg carbon boom push rods assembly,will glue easy with ca glue to the boom, would purchase this product again,many thanks hyperflight.

Excellent product, Item as described, fast shipping and delivery (to Croatia… now EU member). Stretching really easily and adjusting to desirable wire diameter. I prefer to oil the wire before inserting in tight stretched tube.

Excellent product, Item as described, fast shipping and delivery (to Croatia… now EU member). Stretching really easily and adjusting to desirable wire diameter. I prefer to oil the wire before inserting in tight stretched tube.

I used this together with the "24SWG 0.56mm Stainless Steel Wire " for elevator/rudder pushrods. They work great together, though I'll probably be converting to a pull/spring to save on weight and get the lead out of the nose!

For a long time I use the teflon sleeve for DLG pushrods and bigger projects. Have tried it from different suppliers. This one are perfect quality, easily stretch if needed and well bondable with CA.
Good service as well. Thanks.

For a long time I use the teflon sleeve for DLG pushrods and bigger projects. Have tried it from different suppliers. This one are perfect quality, easily stretch if needed and well bondable with CA.
Good service as well. Thanks.

Goods arrived excellent condition, in four working days, which. considering the fact that we are nearly on Mars and you guys are underwater, is pretty smart service.

Very good service and a quick delivery to Australia - thanks

It is very good tube for DLG. I like it. Thanks to Hyperflight. Delivery speed is amazing.

Superb product for the job of remotely controlling points,definitly the best yet tried.

Best pushrod housing. Light, low friction and easy to install with CA glue.

A basic item in many ways. However vitally useful
and does what it says on the tin i.e. makes pushrods glide like
the precision DLG they control. What is less commonplace is the
immaculate way they arrived - neatly coiled and taped together with the ss pushrod wire ordered at the same time, in a tailor-made flat box.
Packed with less care and the wire would spring open and be ruined with kinks and bends. These things matter and Hyperflight takes the trouble.