Still Specifications | ||
---|---|---|
Wing span | 1.00 m | 39.4 in |
Wing area | 13.4 dm2 | 208 sq in |
Length | 70 cm | 27.6 in |
Flying weight from | 600 g | 21.2 oz |
Wing loading | 44.8 g/dm | 14.7 oz/sq ft |
Aspect ratio | 7.5 | |
Wing airfoil | Proprietary | |
Dihedral (EDA) | 0.0º | |
Spinner Diameter | 30 mm | |
Centre of Gravity | 45-47 mm from wing leading edge | |
Controls | Aileron, elevator, throttle |
Still Typical Weights | ||
---|---|---|
Fuselage & fin | 70 g | 2.5 oz |
Wings | 140 g | 4.9 oz |
Tailplane | 13 g | 0.5 oz |
Accessories | 10 g | 0.4 oz |
Total structure | 233 g | 8.2 oz |
Receiver | 8 g | 0.3 oz |
Elevator servo | 10 g | 0.4 oz |
Aileron servos | 18 g | 0.6 oz |
Speed control | 35 g | 1.2 oz |
Motor | 100 g | 3.5 oz |
Prop & spinner | 16 g | 0.6 oz |
Battery | 180 g | 6.3 oz |
Flying weight | 600 g | 21.2 oz |
Recommended Control Throws & Mixes | |
---|---|
Elevator | 4 mm up, 4 mm down |
Ailerons | 4 mm up, 3 mm down |
Recommended Servos | |
---|---|
Elevator | KST X08, MKS DS75K, MKS DS6100, MKS HV6100, Blue Bird BMS-126, Blue Bird BMS-127 |
Ailerons (2 servos) | Ripmax SD150, KST X08, MKS DS75K, MKS DS6100, MKS HV6100, MKS HV6110, Blue Bird BMS-126, Blue Bird BMS-127 |
Recommended Powertrains |
---|
Mega 16/25/1.5, 4.7x4.7 55A ESC, 3S LiPo, 500W |
Mega 16/15/3, 4.7x4.7 35A ESC, 3S LiPo, 350W |
Mega 16/15/2, 4.7x4.7 50A ESC, 2S LiPo, 400W |
Mega 16/15/3 4.1x4.1, 50A ESC, 4S LiPo, 500W |
Mega 16/15/2, 4.1x4.1 60A ESC, 3S LiPo, 600W |
Mega 16/15/3 4.1x4.1 60A ESC, 4S LiPo, 650W |
Review by: IanF
Excellent quality kit, but quite difficult to to set up the tailplane for incidence, and levelling to match the wing. The mounting area is very small and needs careful tweaking. Once set and epoxied all was well.
Flys like on rails using a Mega 16/15/3 motor on 3s Lipo. Not been brave enough to go to 4s yet but have prop and Lipo ready to go.
Review by: Simon Clark
Still RacerReally good quality kit - all fibreglass parts without flaw and filmed parts straight and no wrinkles etc. have not built yet, but it looks pretty easy. cant wait to get flying