|Pulsar Pro 2.5e Specifications|
|Wing span||2.5 m||98 in|
|Wing area||39.6 dm2||614 sq in|
|Length inc spinner||122 cm||48.0 in|
|Flying weight from||744 g||26.2 oz|
|Wing loading||18.8 g/dm2||6.2 oz/sq ft|
|Wing airfoil||AG25 mod|
|EDA (dihedral)||6.0º (Full House)|
|EDA (dihedral)||12.0º (RES)|
|Spinner Diameter||30 mm|
|Centre of Gravity||65-75 mm from wing leading edge|
|RES Controls||Rudder, elevator, spoilers, throttle|
|Full House Controls||Rudder, elevator, ailerons, flap, throttle|
|Pulsar Pro 2.5e Typical Weights (full house)|
|Fuselage||76 g||2.7 oz|
|Wing centre panel||157 g||5.5 oz|
|Wing Tips||152 g||5.4 oz|
|Tail Plane||21 g||0.7 oz|
|Fin||15 g||0.5 oz|
|Accessories & glue||35 g||1.2 oz|
|Total structure||456 g||16.1 oz|
|Wing wiring||20 g||0.7 oz|
|Tail ext leads||10 g||0.4 oz|
|Receiver||10 g||0.4 oz|
|Rudder servo||5 g||0.2 oz|
|Elevator servo||5 g||0.2 oz|
|Wing servos (4)||36 g||1.3 oz|
|Speed control||35 g||1.2 oz|
|Motor||72 g||2.5 oz|
|Prop & spinner||15 g||0.5 oz|
|Battery||80 g||2.8 oz|
|Flying weight||744 g||26.2 oz|
|Recommended Control Throws|
|Rudder||12 mm each way|
|Elevator||6 mm up / 6 mm down|
|Spoilers (RES)||85 degrees up|
|Ailerons (full house)||10 mm up / 8 mm down|
|Flap (full house)||1 mm up / 85 degrees down|
|Recommended flight mode settings>|
|Speed mode||flap 1 mm up, ailerons aligned with flap|
|Cruise mode||flap 0, ailerons aligned with flap|
|Thermal mode||flap 2 mm down, ailerons aligned with flap|
|Crow brake mix||10 mm up aileron with full down flap|
|Elevator & rudder (2 servos)||KST X08, Power HD DSM44, Ripmax SD100, MKS DS65K, MKS DS6100, MKS HV6100|
|Flap/Spoilers (2 servos)||KST X08, MKS DS6100, MKS HV6100, Corona DS843MG, Hyperion DS09-AMD, Ripmax SD150|
|Ailerons (2 servos)-not RES||Ripmax SD100, Power HD DSM44, MKS DS65K, KST X08, Corona DS843MG, Hyperion DS09-SCD|
Review by: WrenE-Pulsar 2.5m
I have taken delivery of a 'full house' 2.5m Pulsar, to compliment my 2.5m RES Pulsar. These are new toys, age prompting my retirement from F5J competition. I just loved those big moulded gliders, bloody marvellous!
Once again Neil has provided exceptional service in packaging and speedy delivery, from the UK to Australia. I have purchased many times from HyperFlight and hold them in the highest regard.
Both planes are works of art, beautifully constructed and finished. Assembly is relatively simple, maiden flights are without drama.
I have been flying the RES for several months, enjoying sniffing around low level lift in our early summer mornings, and continuing into booming thermals as the day progresses. An amazingly well performed device!
The full house plane sits ready for assembly, sort of teasing me every time I walk near it! The theory is that it is an autumn project, but.......!!
Thanks again Neil!
Review by: FransLovely plane
I have this plane for three years now, still holding strong and it's a joy to fly. In the tail I have D47 in the wings D60. Motor is a outrunner 2836 1040kv with 10x6 (12-13m/sec). I have a 1500Mah lipo that fits perfect and gives extreme long flight times.
I am still amazed how well this plane flies, It's able to pick up light thermals and turn very tight. Starting as low as 15m and climb to 200m is no exception.
It is strong enough for some acrobatics and lands on the spot time after time.
Review by: Thomas
Good quality and beautiful 2.5M eGlider, can be installed very quickly, I am using 1010 with 12X6.5 prop, 1000mAH battery, AUW at 740 gram, Climb to 220 meters in 15 seconds; 2 D47 in tail, but plan to replace them with stronger servo, just worry about hurt the gear when landing hard, recommend 2 color wing, mine all red wing sometimes can't be recognized in backlighting.