|14L Etched PTFE Tube Specification|
|Inside diameter||1.68 mm||0.066 in|
|Wall thickness||0.2 mm||0.008 in|
|Outside diameter||2.0 mm||0.079 in|
|3X Stretched ID||1.02 mm||0.040 in|
|Suggested inner||1mm & 1.3mm Carbon Rod||16 SWG or thinner Piano or SS wire|
|US size||14 AWG L type (Lightweight)|
|Weight per m||2.9 g per meter|
Review by: TimGreat for bikes
If you are trying to fit new brake or gear cables to your road bike and the cables are internally routed then this product is the perfect dimensions to use as a guide / straw.
Review by: Hrvoje
Excellent product, Item as described, fast shipping and delivery (to Croatia… now EU member). Stretching really easily and adjusting to desirable wire diameter. I prefer to oil the wire before inserting in tight stretched tube.
Review by: Ric NicholsonPTFE Tube
Great product. Very easy to use. Had slight problem with initial adhesion, and as usual turned out to be Pilot Error...I needed to wipe down the surface with Isopropl C2H5OH. Keep curves smooth and bore free of grit and/or adhesive and they work very well.
Stretched this tube to fit a smaller size of Carbon/Boron rod. To be fair this is the first time I have used these tubes and I had some problems during the stretching. You need to make sure that you complete the stretch on the first attempt as pointed out in the PDF.
Review by: John NealeBondable teflon
An excellent product and by far the easiest way to instal lightweight snakes.
Slide a wire inner into the tubing to allow the tubing to take up the shape of the fuselage between the servo and the control horn. Just add a few drops of cyano to the outside of the tubing to secure. The result is a virtual frictionless control run..
Review by: Ian CouttsPushrod outer
Excellent product which I have now used in two models.
Easily bonded to keep in place and free movement of the pushrod.
I will definitely use it again.