|13L Etched PTFE Tube Specification|
|Inside diameter||1.93 mm||0.076 in|
|Wall thickness||0.2 mm||0.008 in|
|Outside diameter||2.33 mm||0.092 in|
|Suggested inner||1.3 mm & 1.5 mm Carbon Rod||14 SWG or thinner Piano or SS wire|
|US size||13 AWG L type (Lightweight)|
|Weight per m||3.1 g per meter|
Review by: Mike SealeEtched pushrod tube
Used with 1.5mm carbon pushrods in a Bubble Dancer carbon boom. Put the pushrod in the tube to make sure it is straight before running thin Zap from both ends results in a secure outer and very little pushrod slop.
Review by: Anonymous2.05mm ID Etched PTFE
Ideal for 1.5mm piano wire, won't accept 2mm wire.
Review by: Richard EdmundsLe Fish
Building a Le Fish aerobatic glider. Excellent
product and delivery service as usual. Perfect match for 1.5mm carbon pushrods.
Review by: Andy LewisEasy to use.
Excellent product which allows good support for carbon push-rods. Easy to attach to carbon booms with cyano.
Have now used it on four models, with excellent results and no push-rod slop.
Review by: Ric NicholsonPTFE Tube
Great product. Very easy to use. Had slight problem with initial adhesion, and as usual turned out to be Pilot Error...I needed to wipe down the surface with Isopropl C2H5OH. Keep curves smooth and bore free of grit and/or adhesive and they work very well.