|Hyper Spinner Specification|
|Motor shaft||4 mm|
|Distance across hinge pins||27 mm|
|Prop hinge pin diameter||3 mm|
|Prop blade root width||8 mm|
Review by: FabNice fit
I like it. I installed this 32 mm spinner with an Aeronaut 12x6 on an F3J CLM-Pro fuselage that I've cut to 32.5 mm. It's a little tight but works. It would be better cut at 32.0 or even 31.5 mm.
Review by: PaulSpinner
This gives precision and friction free turning as there is no play at the root when used with hyperflight blades. This is a bit more costly but its worth it at a small additional cost. The reduced vibration must benefit the model.
Review by: Glen Cowan
My order of the 32mm HyperSpinner + optional white cone arrived swiftly considering that it had to come from the UK to Australia. I am very pleased with the quality of the spinner and the nifty way that the prop pins are held in. I had to do a little modification to get the prop to fold fully out, but this was no issue at all for me. Overall a very good spinner at a very reasonable price. Thanks Hyperflight
Review by: Steve rogers32mm hyper spinner
This was bought in error for my supra E,which actually needed a 38mm item, but is awaiting a blaster 2E which requires this diameter.
A beautifully engineered item,supplied as we have come to expect from hyperflight,the next morning.
Review by: AnonymousExcellent and OK
I was amazed at the beautifull finish of the aluminium part of the spinner. Really nice and tight fit of the propeller to the fuselage.
I also like the set screws to the propeller shaft. But the spinner is only OK, it is very well connected to the aluminiun parts, but it deformed easily when the propeller was bent forward, and I expect that it will not take many unscrewings.
All in all I will buy this product again and recommend it for the incredible fit and aluminium workmanship.
Review by: NigelHyperSpinner
Superb service from Hyperflight, as ever, and this particular sized spinner is an ideal partner for the Staufenbiel Cougar mini Hotliner. The angled yoke allows the prop blades to fold extremely close to the fuselage and the spinner assembly is very well constructed with an excellent anodised finish on the alloy yoke.
A highly recommended product.
Review by: Colin Boorman32mm HyperSpinner
Excellent product, great service. Thanks
Comment by: Anonymous
Review by: Paul Gibsongood
I have several of these spinners now. They are now my favourite due to the way that the props fold. There is a German brand which clamps the prop carrier onto the shaft and does not damage it. A combination of the two would be ideal
Review by: Paul Gladstone
Excellent service & product.
Review by: Anonymous
I love these spinners. The only issue I have is that after putting on and off a number of times the plastic of the cone where the screws go in gets a bit soft and the screw keeps turning. My fix has to been to put a drop of CA in the hole and let it dry then use. If you've been using a regular spinner this will decrease your effective prop diameter while bringing the props closer to the fuse when folded back. (A good thing).
We do sell replacement plastic cones quite cheaply!
Comment by: Brian lindsay
Thank you, Niel for your prompt service. The spinners arrived approx 10 days after I ordered them, in perfect condition. Not bad for 1/2 way around the world. I would recommend your business to anyone.
Cheers Brian Lindsay