The Maxa Glider fuselage pod is very light, strong. It is mostly built from 2.4GHz friendly Kevlar, but it has a carbon removable hatch, and carbon reinforcements, so we usually recommend the radio's antennas are placed externally. The hatch is the same as used on the AVA Pro, Supra Pro, and Sprite. It is identical for both the Maxa 4 and Maxa 3.5 - so can be used with both wings. The glider fuselage set is supplied with pushrods ready installed so the rudder and elevator servos can be installe...
The Maxa fuselage pod is very light, strong. It is mostly built from 2.4GHz friendly Kevlar, but it has a carbon removable hatch, and carbon reinforcements, so we usually recommend the radio's antennas are placed externally. The hatch is the same as used on the AVA Pro, Supra Pro, and Sprite. It is identical for both the Maxa 4 and Maxa 3.5 - so can be used with both wings. The pod is very slim and needs a 32mm spinner. Its length makes it suitable for use with a very light weight powertrain. O...
These Maxa 3.5 Hard Spread carbon tip panels can be used to convert a 4m Maxa to 3.5m for windier conditions.
As supplied with Vladimir's Models gliders, a 1.5m length of 1.8mm carbon tube running in a 3.0mm outside diameter low friction semi rigid red plastic tube. This excellent quality pushrod set is long enough for the largest models. Sold singly. These can be sent by coiling into a pizza type box, or can be kept straight and sent in a 1.5m long postal tube (extra cost). If sent coiled they will straighten out well. Please remove from the pizza box with care!
The new longer boom for the Maxa.
New Maxa electric fin. This is the updated version, designed for fin mounted rudder and elevator servos. This product is the fin only, and does not include the rudder.
Replacement horizontal stabiliser / tailplane / elevator for the Maxa 4 and Maxa 3.5 electric and glider models. New larger size, span 79 cm.
Set of Supra ballast weighs, manufactured from aluminium, adjustible in steps up to 300 g. 55cm long x 15.9mm diamter.
Set of Supra ballast weighs, manufactured from aluminium and brass, adjustible in steps up to 560 g. 55cm long x 15.9mm diamter.
New 750g all brass ballast set for the Supra and Maxa. See Vladimir's Ballast Pro for Supra/Maxa product page for more info.
A pair (2) of standard Maxa carbon wing joiners. 2 each reserved for JK and DS until 27/5/13
This brass control horn has an M3 thread and is the same as used in Vladimir's Models planes like the Supra, Graphite2, etc. Supplied singly.
